Products > Other Equipment & Products

Best power bank for TS80P?

(1/4) > >>


I see this is a popular question.
I'm new to powerbanks so I don't know too much about them.

I see this question has been asked before "Best power bank for TS80P?"
And the answer was: build one yourself.
I'd rather not...

Is there anything on the market that can match the specifications of the TS80P which are: USB-C, 12V 3A, 30W, QC 3.0 & PD 2.0.

Any ideas?

I was thinking the Xiaomi Mi Power Bank 3 Pro might be suitable.
It has a USB-C output of 12V 3A which matches the soldering iron.

But I'm not too sure about the other specs: 30W, QC 3.0 & PD 2.0
The output of the Xiaomi power bank says 45W max. Would it step down to match the 30W needed for the TS80P?
I understand that QC stands for Quick Charge and PD stands for Power Delivery. I do not believe that the Xiaomi power bank has these features.
Are they necessary?

I'm hoping to get a power bank that works just the same way as plugging the iron into the mains.

really interested if you guys got yourself some power banks and if you could share which are they and your opinion upon them? i am now also wondering which one should I get myself and was hoping you could guide be a bit? thanks

OK I managed to find a good power bank that powers the TS80P the same as the mains:
Xiaomi Power bank 3 20000mAh Pro PLM07ZM
Only ~$60 AUD from eBay

There are other benefits:
The cord and power adapter that comes with the 'more' version also charges the battery at optimal speed.
It's as if the soldering iron was made for that particular battery in mind.

Have you tested it?

Bought that power bank based on your comment, but my TS80P won’t turn on at all when connected to it. I’m using the silicon USB-C to USB-C PD cable included with the TS80P, and stock firmware. Are you running the Ralim firmware or stock?


[0] Message Index

[#] Next page

There was an error while thanking
Go to full version