Crydom componets

[SG-1]

Has anybody had any experience with this brand.  Do they produce quality or crap ?   
 
http://www.crydom.com/en/index.shtml

I am considering using one of their controllers in a project.

http://www.crydom.com/en/Products/Catalog/AdvancedWebPage.aspx?CategoryText1=Control%20Relays&CategoryText2=PCV%20Series%20Proportional%20controller%20-%20Ratings%20from%2015A%20to%2090A%20@%20240%20VAC&SBCatPage=

[RayJones]

We've used a lot of Crydom SSRs at work. They are quality.

[Ernie Milko]

We too use lots of Crydom SSRs at work, not had any problems.

[RayJones]

I should add, our equipment is expected to be functional 24/7 (Weather surveillance radars).

Never had a failure due to a faulty SSR yet.

[JohnS_AZ]

I've used Crydom SSRs in all manner of manufacturing equipment over the years and have quite simply never seen one fail.

[EEwannabe]

I have seen them fail in retail bottled oil manufacturing equipment but they were highly abused.(At least they were usually easy to replace.) As others have said they are quality products.   

-Patrick

[JohnS_AZ]

Okay, I take that back. I did see a pair of them fail, but they were running near their current limit, and the OEM didn't heat sink them. Not Crydoms fault.

[SG-1]

Thanks for all the replies, I get the message Crydom = Quality !     

[Time]

I've had lots of luck with the HV SSRs from www.relays-unlimited.com

[Mr J]

one of the industry standards, just be sure to heat sink and heat sink compound them (sticky white stuff). I've only seen them fail from heat.