Author Topic: Data I/O 29B Programmers  (Read 1323 times)

0 Members and 1 Guest are viewing this topic.

Offline KG7AMVTopic starter

  • Frequent Contributor
  • **
  • Posts: 361
  • Country: us
  • Rhine_Labs
    • My Personal Blog
Data I/O 29B Programmers
« on: July 22, 2024, 06:52:46 pm »
I been looking for a couple years for a Decent Data I/O 29B last week luck would have it I found 2 of them in really nice condition with Unipack 2B's.

I have a few adapters on the way but no housings, Has anyone made a 3d printable housing for the adapters that go in the 2B? I tried the usual sources and including groups.io https://groups.io/g/DataioEPROM/topics But no luck.

Blog Post: https://www.stevenrhine.com/?p=134439



Compared to a Modern Xeltek Superpro 6100N and 7500

Offline KG7AMVTopic starter

  • Frequent Contributor
  • **
  • Posts: 361
  • Country: us
  • Rhine_Labs
    • My Personal Blog
Re: Data I/O 29B Programmers
« Reply #1 on: August 22, 2024, 01:52:16 pm »
The Data I/O groups https://groups.io/g/DataioEPROM the user Mike DiBattista created a modern windows control software called PL2260+ for these 40 year old programmers a lot of support for other data I/O Programmers as well.




Connects and Was Able to Read and verify a Couple Random TMS2716's


If there is anyone good at 3D Modeling and has a Unipack 2B could use a 3D Model of the Removable Adapter housing.




Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf