We just built a soldering/rework station and I'm wondering if there's anything else we should add to be as efficient and capable as possible with respect to electronics prototyping.
We do plan to purchase a dedicated hot-air/rework system, reflow oven, and improved fume extractor eventually.
FM-206 3-Port Rework SystemFM-2027 Soldering Iron (70W)- T15-BCM2 Shape-2BC Bevel with indent
- T15-BCM3 Shape-3BC Bevel with indent
- T15-D08 Shape-0.8D
- T15-D16 Shape-1.6D
- T15-D24 Shape-2.4D
- T15-DL32 Shape-3.2DL
- T15-JS02 Conical Bent Tip R 0.2/30 Degree, 1.6 x 7.9 mm
FM-2030 Soldering Iron (High powered 140W)- T22-D52 Shape-5.2D
- T22-K Shape-K
FM-2024 Desoldering Tool - N3-08 Nozzle
- N3-16 Nozzle
- N3-23 Nozzle
FM-2029 Rework Tool (Hot-Air Type)- N4-01 Nozzle
- N4-02 Nozzle
- N4-03 Nozzle
- N4-04 Nozzle
FM-2032 Micro Soldering Iron (48w) Nordson EFD Ultimus Ultra 2400 Fluid Dispenser (for Flux and Solder Paste) / Vacuum Pickup Tool (for Small SMD Components) Nikon SMZ-10 Microscope with 6.6x to 40x Zoom and Ring IlluminatorAdditionally:- Tweezers
- Many Sizes of Foam Swabs
- IPA Bottles
- Nitrile Gloves (S/M/L)
- Plastic and Fiberglass Brushes
- Solder
- Solderwick
Thanks in advance for the help!