| Products > Other Equipment & Products |
| Geeboon TC20A (now TC22) 240W - TC20B 380W - JBC clone |
| << < (8/9) > >> |
| ralphrmartin:
If you go to the google drive site mentioned above, there is a changelog (in Chinese) for versions up to 1.06. Google tells us that it says: 1.03 Solve the problem that the 210 heating core starts too hard, soft start 1.04 Adjust the vibration sleep sensitivity, modify the tool protection threshold, and add default interface modifications 1.05_Add power detection sleep, dynamic temperature compensation Power detection sleep: Sleep settings increase or decrease power detection options, not applicable sensors can achieve the same effect as vibration sleep, when there is no temperature fluctuation (threshold 20W), delay entering sleep mode. The wake-up method is to touch the soldering iron tip with a wet sponge. Dynamic temperature compensation (default closed): Add an item in the tool menu. When the soldering iron tip is detected to have a large load, the system will dynamically increase the temperature to increase compensation for the soldering iron tip, and exit when the power drops 1.06 Add shutdown direct wake-up heating, power detection sleep threshold can be set, some minor bugs. Also the filename for 1.22 says (again translated by Google) TC20_1.22_Support new background tools.gbn That's all I could find. |
| Hi-fi:
Thanks much! Right now I think I'm just going to stick with 1.08. As my old man told me, if it's not broke, don't fix it. If I find out that additional functions were added in revisions past 1.08, I may update at that time. |
| Aboo:
--- Quote from: Frtech on October 24, 2024, 03:04:23 pm --- There is no more useful info on the Taobao page. Except buyers who complain about the poor quality of the handle or tips. --- End quote --- What are the 'better' tips on Aliexpress for this soldering station? |
| thm_w:
--- Quote from: Aboo on December 25, 2024, 05:28:56 pm ---What are the 'better' tips on Aliexpress for this soldering station? --- End quote --- The tips are OK, don't bother replacing until you've actually used them. Anything from major brands should be fine, i2c, OSS, etc. Aixun claims their tips are the best in terms of reliability, better than JBC. You can also get genuine tips, but IMO not really worth it to pair with a $60 station. I posted some info in other threads but can't find it atm. |
| minkok:
I have a slightly different opinion: I had a bad experience with the cheap I2c and OSS. Stay with the original Geeboon, Aixun, Mechanic, and other proven products. I also want to show my printed STL files (from ABS and PU, walls 1.5mm; density 35%). The 2 Locks are only for the front Plate insolation. |
| Navigation |
| Message Index |
| Next page |
| Previous page |