Author Topic: Intronix Logicport 34 Channel Logic Analyzer Teardown  (Read 31916 times)

0 Members and 1 Guest are viewing this topic.

Online EEVblog

  • Administrator
  • *****
  • Posts: 38030
  • Country: au
    • EEVblog
Re: Intronix Logicport 34 Channel Logic Analyzer Teardown
« Reply #25 on: September 09, 2017, 08:39:38 am »
Yeah, seems like he's just been milking this one for more than a decade now. I can remember when it first came out it was hot stuff.
 

Offline Fraser

  • Super Contributor
  • ***
  • Posts: 13263
  • Country: gb
Re: Intronix Logicport 34 Channel Logic Analyzer Teardown
« Reply #26 on: September 09, 2017, 10:48:27 am »
It says a lot for the design and software if it can be sold over such a long period of time. Kudos to the chap who created it  :-+ It suggests he was way ahead of his time.

There are other small companies selling LA's and I often receive news from one of them, IKALogic. It seems they have to keep releasing new designs to maintain market interest in their products. That appears the way anything PC connected develops these days. It mimics the PC hardware industry that keeps reinventing itself with new hardware.

I still own an Intronix 34. It has served me well. It did have an issue with a couple of channels but thankfully they turned out to be nothing more than two fractured solder joints.

I still get people wanting to buy it from me. Must say something about its reputation amongst those who use LA's I suppose. I also own the ZeroPlus Logicport 128 and a Hantek 32 channel LA. They all, offer different features and have their own limitations. The Intronix Logicport holds its own against them though. I do not want a huge HP LA taking up bench space, more capable though it may be. Compact PC linked LA's are great for casual users wanting a nice compact, but still capable LA tool.

Fraser
« Last Edit: September 11, 2017, 08:33:16 pm by Fraser »
If I have helped you please consider a donation : https://gofund.me/c86b0a2c
 

Offline robermeyer

  • Newbie
  • Posts: 5
  • Country: us
  • Another day another dollar wasted
Re: Intronix Logicport 34 Channel Logic Analyzer Teardown
« Reply #27 on: September 11, 2017, 08:27:38 pm »
The guy that designed this was in his garage at the time.
He has sold tons of them.
He was working on an Analog version for a long time but obviously never shipped anything.
With the old Cyclone FPGA, it would seem obvious to upgrade the design to more modern and cheaper parts with lots more memory.
Then we would all buy another one!
I am disappointed he has not taken it farther.
With all the competition? The creator of the logic port has had a good run but nowadays it would be difficult to compete with what other USB based logic analysers out there.

I disagree.  Most of the current products are simple toys, 20MHz or less.  I would not buy any of them.  That's not competition.
Where is a 200-500MHz competitor today that works as good as this product?  Remember that simple to use and configure is an important aspect.
Adding more memory would be a significant upgrade.  New Cyclones make this a trivial exercise for the guy that designed this one.
The cost would also be much lower since the parts count is so small.
 

Offline nctnico

  • Super Contributor
  • ***
  • Posts: 27337
  • Country: nl
    • NCT Developments
Re: Intronix Logicport 34 Channel Logic Analyzer Teardown
« Reply #28 on: September 11, 2017, 08:41:38 pm »
500Ms/s will only do you any good if the probing system has a high enough bandwidth and flying leads aren't going to do that. Besides that both Salea and Ikalogic have devices with samplerates over 100Ms/s. I have used the Intronix logic port myself and the short memory is annoying to say the least. Depending on the architecture implementing longer memory may be much harder than you'd expect and a less than trivial change which is unlikely to pay for itself.
« Last Edit: September 11, 2017, 08:47:01 pm by nctnico »
There are small lies, big lies and then there is what is on the screen of your oscilloscope.
 

Offline simba15

  • Regular Contributor
  • *
  • Posts: 120
  • Country: ca
Re: Intronix Logicport 34 Channel Logic Analyzer Teardown
« Reply #29 on: March 13, 2024, 05:29:51 pm »
So I know its bad practice to reply on an old thread like this but its the exact discussion I was looking for.

Has anyone found a modern replacement for the Introix LogicPort? it is a great device but the software is far out of date compared to others.

The IKA SP1000G is one of the few LA's that can do 34 ch, but the price is far to high.

Are there any low cost 34ch LA's on the market?

Thanks.
 

Offline Frunse

  • Contributor
  • Posts: 15
  • Country: de
Re: Intronix Logicport 34 Channel Logic Analyzer Teardown
« Reply #30 on: June 27, 2024, 09:26:36 am »
Hello i am also using the Logic Port, and was Happy with it only the Memmory is a bit Short but for Hobbyists its good.

I was Looking for something like this from Other Companies, found only that but the Software is more capabel than the cheeper one on the Bottom i guess:


https://eleshop.de/zeroplus-logic-analyser-lap-c-pro-serie.html
For Hobbyist a bit Overkill i guess 32Channel 1700€ but till 2GHz Samplerate
16 Channel around 980€  :-//

or a bit cheeper but only 89MHz Banthwith 500Msample lots of Interpreter:
https://www.amazon.de/dp/B07W54MF5H/ref=sspa_dk_detail_6?pd_rd_i=B07W54MF5H&pd_rd_w=2vEOg&content-id=amzn1.sym.6ffc9ff7-fa31-49da-8594-196e74bcf61e&pf_rd_p=6ffc9ff7-fa31-49da-8594-196e74bcf61e&pf_rd_r=8X6V0F1ANCTA4YBKRGY9&pd_rd_wg=XMwBE&pd_rd_r=090bc631-e10b-448e-a7d9-6abfd83a2956&s=diy&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw&th=1
around 450-500€
https://www.qdkingst.com/en/download

Lower Priced may be good to:
Agilent digital Dsicovery, but 8CH 800Ms 16CH 400Ms and 32CH 200Ms and 100MHz Bandtwith 2GBit Ram
https://digilent.com/reference/test-and-measurement/digital-discovery/reference-manual
<300€

My Vavorite is for now this Puppy if i ever wanted to Upgrade from Logic Port:
DSLogic U3Pro32 around 400$


Very Long and nice Video with lot of information ;)
I also like the Probe design a lot.

2024.07.04
Was not able to resist and ordered the DSLogic U3Pro32 because of the whole Decoders like S/PDIF, CC1101 (Need it right now for an Projekt but is like SPI with addon Pins),
and differend EEProm as well, Logic port dont't has it and probably won't have it in Future.

Only one thing i miss in DSVIEW why i can't collaps the Lines of an Prepared Decoder or Group let say SPI so i have more space on the Screen.
On Logic Port is absolutly easey lik on File Explorer on Windows.

On an 8 chanel LA i don't need it but on 32Channel realy i miss it or i can't find it on the Demo Version LA not arrived yet ;)

Robert
« Last Edit: July 05, 2024, 09:55:22 am by Frunse »
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf