Author Topic: KSGER T12 - new screen update?  (Read 242 times)

0 Members and 1 Guest are viewing this topic.


Online totalnoob

  • Regular Contributor
  • *
  • Posts: 89
  • Country: us
Re: KSGER T12 - new screen update?
« Reply #1 on: January 15, 2021, 06:44:20 pm »
I think this may be an entirely new board.  It is set up for a JBC245 and not a T12.  I wonder if they are using the STC based controller board that provides 3-way compatibility to the T12, JBC245 and JBC210?  If you check out their site a little further, they have a more expensive, transformer based JBC245 compatible soldering station as well, now.
 

Offline DavidAlfa

  • Frequent Contributor
  • **
  • Posts: 311
  • Country: es
Re: KSGER T12 - new screen update?
« Reply #2 on: January 15, 2021, 06:47:47 pm »
Bah, only has a cheaper lcd instead the oled.
Stm32 soldering station firmware: https://github.com/deividAlfa/stm32_soldering_iron_controller
Want support for your board? Put detailed info in the forum and get ready for testing. Issues? Before reporting, always flash the latest github FW and make a full reset.
Please use the forum, don't PM me!
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf