Products > Other Equipment & Products

Minipro programmer issue on new version

(1/1)

hfarinha:
Hello,

I own a Minipro TL866CS for quite a while and I mainly use it to program EPROMs and EEPROMs (2732/28C64) and so far never had any major issues using it.

Recently I decided to pull the trigger on the model TL866 II Plus (Now re-branded to XGecu TL866II Plus)

I downloaded the latest version of the Windows software and the firmware was upgraded to the latest one which I believe is v04.2.132.


With the new programmer I'm having issues programming the very same ST M2732A EPROM chips that I programmed so many times with the TL866CS.


I usually use the programmer under linux with the 'minipro' software so here's the output of both:


TL866CS
$ minipro -p M2732A@DIP24 -w test.bin
Found TL866CS 03.2.86 (0x256)

VPP=21V, VDD=5V, VCC=5V, Pulse=500us
Writing Code...  5.26Sec  OK
Reading Code...  0.14Sec  OK
Verification OK


TL866 II Plus
$ minipro -p M2732A@DIP24 -w test.bin
Found TL866II+ 04.2.132 (0x284)

VPP=18V, VDD=5.5V, VCC=5V, Pulse=500us
Writing  Code...   0%
Verification failed at address 0x0000: File=0x06, Device=0xFF



Also worth to mention that under the Windows software I have the same issue. I never tested programming the chips with the firmware that came with XGecu TL866II Plus so I really can't confirm if it would work or not (it was only a few minor versions below).


Thanks in advance.

H.

Dilbert66:
It's  known issue with the Tl866II plus regarding 2732's. Here's a link to my post on the subject. Includes  work arounds for adding 21v or 25v and programming 2732's

https://www.eevblog.com/forum/testgear/modification-to-add-the-missing-21-and-25-volt-vpp-ranges-to-your-tl866ii-plus/msg3959678/#msg3959678

hfarinha:
thanks for this. I think I'm keeping my TL866CS for now.

xmris:
@OP just FIY , the Xgecu (windoze) s/ware works under linux well via 'wine', needs just a patched DLL file and some work with the udev rules.
BTW I have no experience with those 21/25v EPROMs , just used with 27cXXXs ones.

Navigation

[0] Message Index

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod