Author Topic: Powertronix Isolation Station  (Read 367 times)

0 Members and 1 Guest are viewing this topic.

Online bdunham7

  • Super Contributor
  • ***
  • Posts: 5803
  • Country: us
Powertronix Isolation Station
« on: June 01, 2022, 07:41:58 pm »
I found these on eBay and they might be a good deal for someone looking for a robust 600VA combination isolation and step up/down transformer.  eBay has enough pictures of the outside, so I just posted one of the inside here--since I tore it apart before turning on, as per the motto.  It's all C13/C14 connectors so you need little adapter cords, but those are typically available and make it handy for worldwide use.  I bought one for a 240VAC bench source and one for a long-term travel power adapter, but it might be a bit big for that.  You get 230/115 selection on both input and output.  I tested it for leakage, it has ~40uA so not medical or metrology grade but adequate for most purposes.  I didn't test load regulation yet, but it has a pretty large toroid so probably pretty good.  It looks really solid and well made--there are literally just too many screws holding the thick stamped aluminum chassis together.  I'm not in any way associated with the seller, but everything was very good including double-boxed packaging.

« Last Edit: June 01, 2022, 07:43:53 pm by bdunham7 »
A 3.5 digit 4.5 digit 5 digit 5.5 digit 6.5 digit 7.5 digit DMM is good enough for most people.

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo