Products > Other Equipment & Products

Reflow Oven Controller Options

(1/4) > >>

Teknotronix:
Has anybody had any experience with this product? Looks like a good solution.

http://www.thesiliconhorizon.com/cms/index.php?option=com_content&view=article&id=66&Itemid=57

Otherwise I was considering one of these, however I'm not exactly sure if I can enter an appropriate profile, still need to look into it capabilities.

http://www.omega.com/ppt/pptsc.asp?ref=CN7500&Nav=a04

Any info is welcome.

Cheers.

Alex:
Hi, Elektor has published several over the last years:

http://www.elektor.com/products/kits-modules/kits/060234-91-reflow-solder-controller.292759.lynkx
http://www.elektor.com/magazines/2006/january/smd-reflow-soldering-oven.58007.lynkx

They made a full oven too:
http://www.elektor.com/news/elektor-smt-reflow-oven-demo-on-youtube.685023.lynkx

What I dont link about the product in your first link is that it requires a PC and the second one is not really fit for purpose (reflow profile, pre-heating etc).

There are stuff on ebay too
http://cgi.ebay.co.uk/Reflow-Oven-SMD-SMT-Prototype-8-temp-profile-curve-/220752581622?pt=LH_DefaultDomain_0&hash=item3365e113f6

I have seen a board coming out with the colour of carbon and the shape of a crisp from one of these, so keep an eye. I think one of the heaters was faulty and the other one was running at double the power to create stimulous for the temp sensor but also created a very hot hotspot.

P.S. What's up with the marketing on banners 2,8,9 and 10? Do they think their customers are desparate guys? Where is Jeri to rant about it?!

Teknotronix:
Thanks Alex. Just found this, looks fantastic for the money, its the same as the ebay link above

http://cgi.ebay.com/T-962-INFRARED-IC-HEATER-REFLOW-WAVE-OVEN-BGA-T962-c1-/390297863525?pt=LH_DefaultDomain_0&hash=item5adf90c565

Alex:
Nothing to lose, they also accept returns. They have also sold one, you can contact that buyer to get a mini review.
Hell, I would set a pizza baking profile too for optimum amortisation.

Alex

Teknotronix:
Thanks for the info Alex.


--- Quote ---P.S. What's up with the marketing on banners 2,8,9 and 10? Do they think their customers are desparate guys? Where is Jeri to rant about it?!

--- End quote ---

 ???

Navigation

[0] Message Index

[#] Next page