Products > Other Equipment & Products

CFW for KSGER/Quicko STM32 Soldering Stations

<< < (523/593) > >>

That's what it does when configured in stand mode. Of course, you have to modify your stand with a switch/grounding ring and connect it to the board. You might also want to remove the shaker in the handle. As long as you do the necessary hardware mods, the CFW will do what you want.


--- Quote from: luqash on January 28, 2022, 05:08:05 am ---wants the soldering iron to go to sleep as soon as it is put on the stand

--- End quote ---
if you want then go and buy normal solder station with normal cpu and normal fw. why the f u even complain here. this thread is for quicko\ksger stm32 stations ONLY. u dont have any

Maybe he wants to know if it's possible before buying parts/board he needs. Not sure if he's a "plz bro" or just can't communicate well in English.

What I don't understand is how he knows what the cfw does if he wasn't able to program the mm32.

I have a strong feeling a lot of stuff got lost in translation. I mean, it's either that or we landed in crazytown.  ^-^


[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Go to full version