Products > Other Equipment & Products

CFW for KSGER/Quicko STM32 Soldering Stations

<< < (842/849) > >>

DavidAlfa:
Yes, as long as it uses a stm32f10x and oled display, it should work or be easy to adapt.
Though these days lots are being shipped with fake stm32, you might need to replace it for CFW to work.

marck120:

--- Quote from: DavidAlfa on September 14, 2024, 01:10:35 pm ---Yes, as long as it uses a stm32f10x and oled display, it should work or be easy to adapt.
Though these days lots are being shipped with fake stm32, you might need to replace it for CFW to work.

--- End quote ---

Thanks a lot, yes from what the user reviews say it has a STM32F103 processor:

"It has a decent STM32F103 processor Extremely easy to calibrate hints and select hints and a myriad of menus that allow sleep time/temp and stdby time/temp."

https://it.aliexpress.com/item/1005002724734568.html



Let's hope it's an original stm32 otherwise unsoldering and soldering a new chip is a problem.

DavidAlfa:
Btw, that one seems to be a T12-958 v2.

marck120:

--- Quote from: DavidAlfa on September 15, 2024, 11:22:11 am ---Btw, that one seems to be a T12-958 v2.

--- End quote ---

So it is compatible, I also found the STM32 T12-958 with the blue grip which is better I think.

https://it.aliexpress.com/item/1005003064223657.html

marck120:

--- Quote from: DavidAlfa on September 15, 2024, 11:22:11 am ---Btw, that one seems to be a T12-958 v2.

--- End quote ---

Sorry for a quick question, are the QUICKO or the KSGER not compatible with the original hakko FX-9501 handle ? In fact I saw that each model has different handles, the 958 has its own specific handle:

https://it.aliexpress.com/item/1005003059542690.html

Navigation

[0] Message Index

[#] Next page

[*] Previous page