Author Topic: Test needle drilling platform type thing for 2 sided PCB work ?  (Read 379 times)

0 Members and 1 Guest are viewing this topic.

Offline MathWizardTopic starter

  • Super Contributor
  • ***
  • Posts: 1356
  • Country: ca
I'm trying to find some traces on the other side of a PCB, using 2 hands and DMM probes, and I don't want to solder on a bunch of wires, and I don't have a fine metal brush for use with continuity mode. I tried some stranded copper wire, but without having a good cleaning, it didn't work so good.

So I'm just wondering if u can get a product, or if anyone made there own thing, that would look like a drilling platform,  or a mosquito or some spider, with a base you could strap onto the PCB, and have an adjustable needle, that locks in place and has a wire for your DMM....so u can probe the other side of the PCB.

That would work great for chips too, that u don't want to try and solder onto.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf