EEVblog Electronics Community Forum

Electronics => RF, Microwave, Ham Radio => Topic started by: msr on January 29, 2016, 04:26:17 pm

Title: 3G embedded module recomendation
Post by: msr on January 29, 2016, 04:26:17 pm

Hey everyone,

I never used a cellular embedded module but at the moment I have a project which requires one. The whole design needs to obtain FCC/PTCRB certification so a pre-certified module would come in handy. However I would prefer to pay a bigger price tag in order to reduce the hassle of certification as much as possible so I'm not looking only for a pre-certified module but a board that contains everything's RF related (the antenna tuning layout) and that is pre-certified as well. Good support and documentation is also a must have.

Do you have any suggestions on such board?

So far I came up with NimbleLink which uses a Telit module: http://nimbelink.com/skywire-evdo/ (http://nimbelink.com/skywire-evdo/)

Title: Re: 3G embedded module recomendation
Post by: Lord of nothing on March 28, 2016, 08:27:40 pm

why not an normal 3G Module?
https://forum.sierrawireless.com

Title: Re: 3G embedded module recomendation
Post by: Apollyon25_ on May 02, 2016, 10:57:52 pm

You'll have to certify regardless of how pre-certified modules are.
The process may simplify slightly...

Title: Re: 3G embedded module recomendation
Post by: steve_w on May 03, 2016, 02:08:26 am

Try these

http://www.telit.com/cellular/ (http://www.telit.com/cellular/)