Author Topic: Arria V FPGA RF Development Kit - Interface  (Read 1502 times)

0 Members and 1 Guest are viewing this topic.

Offline Eric_the_EETopic starter

  • Contributor
  • Posts: 33
  • Country: us
Arria V FPGA RF Development Kit - Interface
« on: March 01, 2016, 05:21:50 pm »
Hello All,
I am an undergraduate EE student working on a project using the Arria V FPGA RF Development kit (https://www.altera.com/products/boards_and_kits/dev-kits/altera/kit-arria-v-rf.html).
I'm trying to figure out how to interface the FPGA with the TI DAC on the RF daughter board. But unfortunately, there is no documentation on the interface between these two boards.

Has anyone else ever used this kit successfully? Any source files you are willing to share to get me started?
 

Offline John_ITIC

  • Frequent Contributor
  • **
  • Posts: 507
  • Country: us
  • ITIC Protocol Analyzers
    • International Test Instruments Corporation
Re: Arria V FPGA RF Development Kit - Interface
« Reply #1 on: March 01, 2016, 09:32:35 pm »
This defines the interface. You need to look elsewhere for the specs of your daughter cards.
https://www.altera.com/en_US/pdfs/literature/ds/hsmc_spec.pdf
Pocket-Sized USB 2.0 LS/FS/HS Protocol Analyzer Model 1480A with OTG decoding.
Pocket-sized PCI Express 1.1 Protocol Analyzer Model 2500A. 2.5 Gbps with x1, x2 and x4 lane widths.
https://www.internationaltestinstruments.com
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf