EEVblog Electronics Community Forum
Electronics => RF, Microwave, Ham Radio => Topic started by: PA3BBV on April 04, 2023, 08:13:25 am
-
Hello all,
I own the KENT EK4 CW keyer. This keyer can be upgraded to a memory keyer EK4M. It is said that a memory chip eeprom must be inserted. An 8-pin IC socket is available on the printed circuit board. I assume that it needs a serial eeprom.
Does anyone have a similar keyer with the memory expansion? It would also be nice if he took a look at the print to see which 8 pin ic is on it.
I would really appreciate that. leo
-
Suggest you try to contact the manufacturers:
https://www.kent-engineers.com (https://www.kent-engineers.com)
73
Egil