Author Topic: Pi-Star Repeater refuse to work  (Read 814 times)

0 Members and 1 Guest are viewing this topic.

Offline Lord of nothing

  • Super Contributor
  • ***
  • Posts: 1484
  • Country: at
Pi-Star Repeater refuse to work
« on: July 22, 2021, 09:07:56 pm »
Hi
I got this: https://de.aliexpress.com/item/1005002262044308.html
for my Pi to use them as an Repeater at Home when I am in the Hills around our House to get a good Connection. Lets say its semi legal but the most important think is way below the 0,5W limit.
I try many settings but the not work. Sadly I dont see any Manual who explain how to set them up.
So any idea to get them run?
(Sry I know why I am hate such Pi stuff if someone have a problem there is nobody who can give a good explanation.)
THX!
Made in Japan, destroyed in Sulz im Wienerwald.
 

Offline Ringmodulator

  • Regular Contributor
  • *
  • Posts: 98
  • Country: de
Re: Pi-Star Repeater refuse to work
« Reply #1 on: July 28, 2021, 11:47:34 am »
Hi,

there is lots of info on the web, even several youtube videos.

You might start here: https://amateurradionotes.com/pi-star.htm

With specfic questions, try the pi-star forum: https://forum.pistar.uk/

73, Chris
 

Offline Lord of nothing

  • Super Contributor
  • ***
  • Posts: 1484
  • Country: at
Re: Pi-Star Repeater refuse to work
« Reply #2 on: July 28, 2021, 05:43:56 pm »
Quote
With specfic questions, try the pi-star forum: https://forum.pistar.uk/
I try to register there 5x but nothing working.  :clap:  :wtf:
Quote
★ Node Callsign – For a hotspot, enter your own callsign.
Well the Pistar dont give me any?!  :-//
And I dont work for the Brandweer?!
That is so weird stuff...  :=\
Made in Japan, destroyed in Sulz im Wienerwald.
 

Offline Ringmodulator

  • Regular Contributor
  • *
  • Posts: 98
  • Country: de
Re: Pi-Star Repeater refuse to work
« Reply #3 on: July 29, 2021, 08:36:35 am »
I have no idea, where you got stuck.

Brandmeister is just the name of o commonly used network. It has nothing to do with fire fighters.

Are you a licensed ham radio operator with a callsign? If not, stop right here and get a license or put the mmdvm board uo for sale
.
Do you have a valid DMR ID? -> https://radioid.net/register#!

Have you registered for the Brandmeister network and set a hotspot password? -> https://brandmeister.network/?page=register

Can you connect to your pi-star webinterface?

Try this: https://www.youtube.com/results?search_query=pi-star+setup

73, Chris
 

Offline Lord of nothing

  • Super Contributor
  • ***
  • Posts: 1484
  • Country: at
Re: Pi-Star Repeater refuse to work
« Reply #4 on: July 29, 2021, 08:50:22 am »
 :phew:
Quote
Are you a licensed ham radio operator with a callsign?
No and I dont need one.
Quote
and get a license
I never support the corrupt regime.
Quote
or put the mmdvm board uo for sale
why? I and and need to use them.
Quote
network
I dont want or never need to connect to anything.
I want use them only as an repeater.
Quote
Can you connect to your pi-star webinterface?
Yes and even a Beacon Broadcast on the right Freq. work.
Sadly just 2x it work that my Radio was able to transmitt a (valide) DMR Transmission who got recognised by the Repeater. I dont know what went wrong all time.  :-//
Sadly 99,XXX...% of all How to are doing steps I dont want or even need like connect to the fire fighter Network?!  :'(
Made in Japan, destroyed in Sulz im Wienerwald.
 

Offline thinkfat

  • Supporter
  • ****
  • Posts: 1618
  • Country: de
    • Matthias' Hackerstübchen
Re: Pi-Star Repeater refuse to work
« Reply #5 on: July 29, 2021, 12:18:18 pm »
The point is not whether you want to "support a corrupt regime" or not, but if you may use this device lawfully without having a proper license.  :palm:
Everybody likes gadgets. Until they try to make them.
 

Offline Lord of nothing

  • Super Contributor
  • ***
  • Posts: 1484
  • Country: at
Re: Pi-Star Repeater refuse to work
« Reply #6 on: July 29, 2021, 06:25:18 pm »
 ::)...
Its a gray think nothing illegal. But I am operate it nobody elese. so...
I want to run it rite and not disturb someone elese.  :-+
Made in Japan, destroyed in Sulz im Wienerwald.
 

Online coppercone2

  • Super Contributor
  • ***
  • Posts: 5638
  • Country: us
  • $
Re: Pi-Star Repeater refuse to work
« Reply #7 on: July 29, 2021, 06:40:26 pm »
the USA has a few unregulated bands with power limits only in LF MF and HF

I don't think this discussion is necessarily crimnal because we don't know austrian law and it is possible to do this in the USA legally without a license at the right frequency. the distances quoted are pretty small

its a good exercise because you get to network a radio system. Just keep in mind with a license the setup becomes pointless because the range on a license level transmitter would dwarf the legal repeater/transmitter system

I am not seeing a 'help me with my 3000W linear amplifier hidden under my bed' so I can annoy truckers thread

but low power networks are not necessarily a bad thing to study.
« Last Edit: July 29, 2021, 06:44:27 pm by coppercone2 »
 

Offline Lord of nothing

  • Super Contributor
  • ***
  • Posts: 1484
  • Country: at
Re: Pi-Star Repeater refuse to work
« Reply #8 on: July 29, 2021, 06:54:43 pm »
It run on PMR446 who is the equivalent of GMRS in the US.
Here its <500mw and a non removal Antenna. The Repeater fit into the Bandplan (and work at least as Beacon).
So what is the Output power of that think <100mw?
Beside of that there are a lof of Kids with there Analoge Radio pushing the "Bell", "Alarm" Button and you hear the hole day just "weo weo weo weo weo"... Nobody care about...
Construction Worker use (illegal) 10W Radio on a Crane who I dont know how many KM but a lot of cover... Nobody care...
So my tiny small Repeater who will cover our House are not a problem.
And I am not insane and broadcast to get attention from the wrong People.
Made in Japan, destroyed in Sulz im Wienerwald.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf