Author Topic: FT-897 CAT Fuse Mod  (Read 1987 times)

0 Members and 1 Guest are viewing this topic.

Offline xrunner

  • Super Contributor
  • ***
  • Posts: 6567
  • Country: us
  • hp>Agilent>Keysight>???
FT-897 CAT Fuse Mod
« on: June 06, 2016, 12:06:38 pm »
A ham friend of mine wanted me to do a mod for him to his FT-897. Seems that there is a 3.15A SMD fuse that serves 13.8V to the CAT connector. He can't work on SMD devices (too small) and he wanted to be able to replace the fuse again if it blows. So he wanted to install a replaceable fuse. I offered to replace the SMD fuse but he really wanted this mod installed. I agree it seems dumb to have an SMD fuse that's so hard for the average person to replace.

This mod has been done before by people, so I simply duplicated it on his radio. The replaceable fuse is simply tacked onto the pads of the SMD fuse. Now he's happy.  :)
« Last Edit: June 06, 2016, 12:08:10 pm by xrunner »
[hp] Hewlett . Packard
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf