Author Topic: Looking for PLC with multiple RS485 and CAN  (Read 1721 times)

0 Members and 1 Guest are viewing this topic.

Offline davorin

  • Supporter
  • ****
  • Posts: 847
  • Country: ch
Looking for PLC with multiple RS485 and CAN
« on: June 05, 2020, 09:37:56 am »
Good morning

For a new project I am looking for a PLC or other controller which has at least:

- 4 * RS485
- 1 * CAN
- 4 digital inputs
- 2 DC outputs 24V@2A

Most PLCs I've found so far have only 1 or 2 RS485 interfaces...


thanks in advance
davorin
 

Offline greasemonkey

  • Contributor
  • Posts: 38
  • Country: ch
Re: Looking for PLC with multiple RS485 and CAN
« Reply #1 on: June 17, 2020, 05:51:21 pm »
I don't know what your budget is but I would suggest a modular OMRON PLC.

CPU CJ2 https://industrial.omron.eu/en/products/cj2
CAN CJ1W-CORT21 https://industrial.omron.eu/en/products/CJ1W-CORT21
RS485 2x CJ1W-SCU32 https://industrial.omron.eu/en/products/CJ1W-SCU32

GrĂ¼sse aus Innertkirchen

My moderately uninteresting blog: https://btbm.ch
 

Offline senso

  • Frequent Contributor
  • **
  • Posts: 951
  • Country: pt
    • My AVR tutorials
Re: Looking for PLC with multiple RS485 and CAN
« Reply #2 on: July 18, 2020, 12:41:10 pm »
Why so many RS+485 buses?
Also that CJ2 combo will be expensive...
RS-485 to some industrial comm standard is common and would be way cheaper.
 

Offline rvalente

  • Frequent Contributor
  • **
  • Posts: 568
  • Country: br
Re: Looking for PLC with multiple RS485 and CAN
« Reply #3 on: August 29, 2020, 08:49:24 pm »
The siemens s7 1200 can hold up to 3 comms modules in the left side, as well as one 485 in the cpu. So you could get 4x485 or 3x485 + 1can.

All these 485 runs different protocols/bauds?
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf