Author Topic: Looking for IR codes of Robomow RM series lawnmower remote  (Read 573 times)

0 Members and 1 Guest are viewing this topic.

Offline martonmiklos

  • Contributor
  • Posts: 17
  • Country: hu
    • Blog
Looking for IR codes of Robomow RM series lawnmower remote
« on: September 23, 2021, 08:16:59 pm »
Hi all,

I would like to control my RM-510 with an external controller. The debug port does not exposes ability to drive the motor, however there was an infra red transmitter for this device (what I do not have). I would like to simulate the codes sent by this remote. However it is no longer available, and at the end of the day I do not really need it.

It's partnumber is MRK5004B:
https://www.amazon.de/-/en/Robomow-MRK5004B-IR-Remote-Control/dp/B007HMLDBO

If anyone would have such a transmitter and could somehow digitize the IR codes (LIRC or any other IR signal recorder) that would be awesome.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf