Electronics > Mechanical & Automation Engineering

Looking for IR codes of Robomow RM series lawnmower remote

(1/1)

martonmiklos:
Hi all,

I would like to control my RM-510 with an external controller. The debug port does not exposes ability to drive the motor, however there was an infra red transmitter for this device (what I do not have). I would like to simulate the codes sent by this remote. However it is no longer available, and at the end of the day I do not really need it.

It's partnumber is MRK5004B:
https://www.amazon.de/-/en/Robomow-MRK5004B-IR-Remote-Control/dp/B007HMLDBO

If anyone would have such a transmitter and could somehow digitize the IR codes (LIRC or any other IR signal recorder) that would be awesome.

martonmiklos:
Just for the posterity.

I managed to get the firmware of the mower itself, reverse engineered it and came up with an emulator:
https://github.com/martonmiklos/robomow_rm_ir_remote_emulator

Navigation

[0] Message Index