| Products > Test Equipment |
| 53132A bad display |
| (1/9) > >> |
| Robaroni:
Does anyone have the display part number for the 53132A counter? I don't want the complete board, just the display itself. The complete board goes for around $550.00 US. I think it should be available as I changed the display on a 34401A I bought off ebay but that was a number of years ago. I'm glad these new instruments are going to OLED. Thanks for your time and help. Rob |
| uncle_bob:
--- Quote from: Robaroni on May 18, 2016, 11:58:55 pm ---Does anyone have the display part number for the 53132A counter? I don't want the complete board, just the display itself. The complete board goes for around $550.00 US. I think it should be available as I changed the display on a 34401A I bought off ebay but that was a number of years ago. I'm glad these new instruments are going to OLED. Thanks for your time and help. Rob --- End quote --- Hi The only source for the full custom display on the 53132A is the HP display board. I believe the 53131 board is the same part. You can occasionally find people who have stripped the display from the board. Either way, they aren't cheap and you likely are buying a used item. Bob |
| bitseeker:
The display board part number is 53131-60002. US$1047 from Keysight. :o Unlike the 34401A, for which China is making VFDs, as far as I know no other HP instruments with VFD have alternative sources for new displays. You'll have to wait for someone to part out the display board from a device that died, or buy a parts unit. --- Quote from: Robaroni on May 18, 2016, 11:58:55 pm ---I'm glad these new instruments are going to OLED. --- End quote --- Why are you glad about that? OLEDs burn out too. So, from that perspective they're not any better than VFD. For longevity, it's better to use LED or LCD. |
| 2x2l:
--- Quote from: bitseeker on May 19, 2016, 05:14:43 am ---The display board part number is 53131-60002. US$1047 from Keysight. :o Unlike the 34401A, for which China is making VFDs, as far as I know no other HP instruments with VFD have alternative sources for new displays. You'll have to wait for someone to part out the display board from a device that died, or buy a parts unit. --- Quote from: Robaroni on May 18, 2016, 11:58:55 pm ---I'm glad these new instruments are going to OLED. --- End quote --- Whoa, are they making the whole front panel assembly with drivers and the masked ROM and all? Prettttttttty sweet assuming they're not complete shite. Why are you glad about that? OLEDs burn out too. So, from that perspective they're not any better than VFD. For longevity, it's better to use LED or LCD. --- End quote --- |
| bitseeker:
China is just making the VFD (the glass part that contains the display). You'd have to desolder the old one and solder in the new one (carefully). |
| Navigation |
| Message Index |
| Next page |