Products > Test Equipment
A few specific questions for SDS2000X HD owners (or possibly any SDS owners)
Spike:
--- Quote from: kripton2035 on June 06, 2024, 06:30:41 am ---you're right I don't have the liblxi announced in the about dialog ...
--- End quote ---
I’m struggling to find the reference that made me believe that it should link that in the first place. I’ll go wading through this while I’m waiting for the scope to arrive and perhaps by the time it does I’ll have a better idea of whether it should work with the HD or not. If not, hopefully not too much effort to make it work.
kripton2035:
the problem was that when I tried to connect to the scope IP address, it did not respond, and the scope would hang up. I had to force restart it.
Spike:
--- Quote from: kripton2035 on June 06, 2024, 09:28:08 am ---the problem was that when I tried to connect to the scope IP address, it did not respond, and the scope would hang up. I had to force restart it.
--- End quote ---
After browsing the source a bit I would not expect this to work with the HD or even the Plus without changes. Ignoring any potential connection issues, I don’t think that the driver will recognize it as a supported model. There’s a supported model struct with fields enumerating certain properties such as minimum timebase, number of analog channels, whether it supports digital channels and how many, etc.
There’s no such entry for the HD (or the Plus) and even if it identified itself as an SDS2000X, that entry seems wrong for the HD. Hell, it even seems wrong for the model it is ostensibly for. It specifies no digital channel support for it at all.
That’s just from a quick look, it’s possible I’m missing something. In any case it’s possible that adding support is a simple matter of populating a struct for it and adding it to an array. Of course it’s also possible that chicken bones and a voodoo doll would be required. I doubt it but …
kripton2035:
the siglent sds2000x is supported by sigrok ...
https://www.sigrok.org/wiki/Siglent_SDS2000X_series
2N3055:
--- Quote from: kripton2035 on June 06, 2024, 11:46:49 am ---the siglent sds2000x is supported by sigrok ...
https://www.sigrok.org/wiki/Siglent_SDS2000X_series
--- End quote ---
Yes but not 2000xPlus or 2000xHD.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version