| Products > Test Equipment |
| A few specific questions for SDS2000X HD owners (or possibly any SDS owners) |
| << < (7/15) > >> |
| Spike:
--- Quote from: kripton2035 on June 06, 2024, 09:11:20 pm --- --- Quote ---Another issue is that for the most part, people who volunteer to add device support very likely only have their model and nothing more. Testing for unintended consequences up or down the model line is virtually impossible. If and when I take delivery of an HD I will likely take a crack at adding support for it in sigrok, but I don't expect it to get merged. --- End quote --- I don't care if it's not merged as long as you publish a macos arm version that works with the 2000HD ! --- End quote --- Publish? Unlikely. Give you a copy if you ask? Sure. Assuming I get it working at all, that is. The PR for Plus support is not an insignificant number of changes. I'd probably start there, though. In fact, if you want to try to get this going now you could probably just add the HD to the supported series and supported models structs to that patch (maybe two lines of code), apply it to your own repo and build. My guess is that it might work but may or may not render other models broken. If you don't have those models then it would be of no consequence. There are other reasons why the PR has not been merged but at least it would be a start. |
| kripton2035:
I found a macos binary online (I don't remember where but it was not the official release that was too old) I did not try to build one from sources but I can try. then as you said, I have only my 2000hd to connect (and also some basic low cost clone logic analyzers that should always work with sigrok ?) |
| Spike:
--- Quote from: kripton2035 on June 07, 2024, 06:52:32 am ---I found a macos binary online (I don't remember where but it was not the official release that was too old) I did not try to build one from sources but I can try. --- End quote --- I have an arm binary that I built from recent sources. It does not contain HD support as mentioned above but at least it is up to date. I cannot guarantee that it will work for you but you're welcome to it if you want. I can, time permitting, try to apply the 2000+ patch with HD added to the supported devices array and build that. What I cannot do, though, is test it to make sure it works nor support it if it doesn't. At least until I get my hands on an HD. --- Quote ---then as you said, I have only my 2000hd to connect (and also some basic low cost clone logic analyzers that should always work with sigrok ?) --- End quote --- Correct. Only SDS devices would be affected by this patch. |
| Spike:
--- Quote from: Spike on June 07, 2024, 09:43:00 pm --- --- Quote from: kripton2035 on June 07, 2024, 06:52:32 am ---I found a macos binary online (I don't remember where but it was not the official release that was too old) I did not try to build one from sources but I can try. --- End quote --- I have an arm binary that I built from recent sources. It does not contain HD support as mentioned above but at least it is up to date. I cannot guarantee that it will work for you but you're welcome to it if you want. I can, time permitting, try to apply the 2000+ patch with HD added to the supported devices array and build that. What I cannot do, though, is test it to make sure it works nor support it if it doesn't. At least until I get my hands on an HD. --- End quote --- So I took a closer look at that patch and there seems to be fair amount this sprinkled in: --- Code: ---if (!strcmp(devc->model->series->name, "SDS2000X+")) { --- End code --- Which means I won’t even bother with this until I have a device to test with. |
| kripton2035:
I downloaded the latest nightly build of pulseview for mac, it is from march 2024. but it does not start there is a missing library. and it is an intel app also. I tried to build from the sources, but I have a lot of errors, each time I try to correct an error i get another one... :( I'm ok to try your arm binary, even if it does not connect to the 2000hd for now. |
| Navigation |
| Message Index |
| Next page |
| Previous page |