Products > Test Equipment

A look at the Uni-T UT210E

<< < (125/177) > >>

dreno:
Where did you buy your uni-t from, from a reputable source or aliexpress or banggood?

stuartk:

--- Quote ---kill backlight timeout
change location fc to 00 (normally 0f)

dc mode first:
make 2A range dc>ac instead of ac>dc
87 = 16 (normally 17)
97 = 17 (normally 16)

make 20A range dc>ac instead of ac>dc
8b = 18 (normally 19)
9b = 19 (normally 18)

make 100A range dc>ac instead of ac>dc
8d = 1a (normally 1b)
9d = 1b (normally 1a)

make Vdc>Vac(with mv) instead of Vac>Vdc
8e = 05 (normally 04)
9e = 06 (normally 05)
--- End quote ---

After going through the whole thread, I picked the exact same modifications. I didn't want the dot-less mode or the higher count as I like the artwork and screen icons on the multimeter matching up with the actual reading.

I purchased mine on ebay: https://www.ebay.com/itm/252445358891 for 34 US$ 2 weeks ago. Came with the latest chip-set. I noticed that they just increased their prices to $45.50.  >:(

ONDevil:
@stj

thx for your quick answer but it is not working.
I hope i made it right and use the function GoTo to find your described locations..

Sorry i`m new in programming and have no experience!
(I bought the TL866 II Plus to beginn programming)

I have marked the adresses with yellow points in the Attachments Picture
and filled the location with the new values but it is not working. (the new values are not on the picture.. just for show the original values)

@dreno

i bought my UT216C on ebay for 57,98€ (shipped in 4days, from and to Germany)

Please excuse my bad english

edit: add attachments

stj:
there is no attachement.

ONDevil:

--- Quote from: stj on January 14, 2019, 10:24:09 pm ---there is no attachement.

--- End quote ---
Now added, sorry

Gesendet von meinem G8441 mit Tapatalk

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod