Products > Test Equipment

A look at the Uni-T UT210E

<< < (143/177) > >>

Tjuurko:
The meter is built around a Digital Multimeter (DMM) ASIC, two variants have been used at various times:
DTM0660L (older units), maximum count: 4000/6000 (9999 for frequency and capacitance)
DM1106EN (newer units), maximum count 9999

Fennec:

--- Quote from: Kbird on June 23, 2020, 12:49:00 am ---Try to buy from one Fullfilled by Amazon so you don't need to wait for it from HongKong or further a field and can return easily if not the real deal. plenty of PCB pics etc here to compare too etc.

--- End quote ---

His own link
https://www.amazon.com/UNI-T-UT210E-Capacitance-Multimeter-Resolution/dp/B075ZHDQFP/ref=sr_1_8?dchild=1&keywords=UT210E&qid=1592905657&sr=8-8

Uni-T UT210E 18 left in stock -

Nothing with HongKong, warranty over Amazon, so I still not understand his question.

shved:
I'm thinking of buying from here ( https://www.aliexpress.com/item/4000626261640.html?spm=a2g0o.detail.1000060.1.63e74fe04KjYBj&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.128609.0&scm_id=1007.13339.128609.0&scm-url=1007.13339.128609.0&pvid=e8d2e472-6a9b-48c2-a53b-898e3580e92d&_t=gps-id:pcDetailBottomMoreThisSeller,scm-url:1007.13339.128609.0,pvid:e8d2e472-6a9b-48c2-a53b-898e3580e92d,tpp_buckets:668%230%23177981%2314_668%23808%237756%23245_668%23888%233325%233_668%232846%238110%23315_668%232717%237567%23914_668%233164%239976%23467 ) . Is that a good deal? Or is it one of those scam ali-shops?

brainwash:
Does anyone have a good way to demagnetize the sensor? Was thinking of 3D printing a drill insert with 4 alternating magnets.

joeqsmith:

--- Quote from: brainwash on July 04, 2020, 12:35:06 am ---Does anyone have a good way to demagnetize the sensor? Was thinking of 3D printing a drill insert with 4 alternating magnets.

--- End quote ---

https://www.eevblog.com/forum/testgear/a-look-at-the-uni-t-ut210e/msg1040540/#msg1040540

You could try an old tape eraser.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod