Products > Test Equipment
A look at the Uni-T UT210E
Shonky:
--- Quote from: elman on September 02, 2023, 12:06:00 pm ---I took out the memory chip and read it correctly.
--- End quote ---
Well I'd still say no you didn't. Why would there be a memory device that is 100% zeroes? Either that or the chip is faulty but you've not mentioned any faults.
mwb1100:
--- Quote from: Shonky on September 04, 2023, 02:42:46 am ---
--- Quote from: elman on September 02, 2023, 12:06:00 pm ---I took out the memory chip and read it correctly.
--- End quote ---
Well I'd still say no you didn't. Why would there be a memory device that is 100% zeroes? Either that or the chip is faulty but you've not mentioned any faults.
--- End quote ---
I interpreted "read it correctly" as after removing the memory chip from the meter elman got a non-zeros reading.
Shonky:
--- Quote from: mwb1100 on September 04, 2023, 03:22:03 am ---
--- Quote from: Shonky on September 04, 2023, 02:42:46 am ---
--- Quote from: elman on September 02, 2023, 12:06:00 pm ---I took out the memory chip and read it correctly.
--- End quote ---
Well I'd still say no you didn't. Why would there be a memory device that is 100% zeroes? Either that or the chip is faulty but you've not mentioned any faults.
--- End quote ---
I interpreted "read it correctly" as after removing the memory chip from the meter elman got a non-zeros reading.
--- End quote ---
Ah yes you may be right.
elman:
I'm sorry for creating confusion.
I removed the chip from the mother board and read it correctly (not 00 everywhere) , and I swapped the AC and DC functions.
I saw in a video and later tested that the memory chip cannot be read correctly if the rotary switch is in the OFF position, it must be in the 2A, 20A position... Now I can read the chip right on the board.
Now I want to correct the reading error on the ampere scale and on the 100A scale to increase the read value to 1000A.
Thank you for your interest.
1001:
New opamp in my UT210E, GS8334.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version