Products > Test Equipment

A review of the GWInstek 1054B

<< < (14/16) > >>

nctnico:

--- Quote from: rauldm on March 28, 2022, 04:49:09 am ---The Math channel can work with filter app? for example I put a equation in math channel like (atan(ch1/ch2)), Can get output of  this function filtered with filter app?

--- End quote ---
Yes and no. The filtering comes before the math operation.

rauldm:

--- Quote from: nctnico on March 28, 2022, 08:23:48 am ---
--- Quote from: rauldm on March 28, 2022, 04:49:09 am ---The Math channel can work with filter app? for example I put a equation in math channel like (atan(ch1/ch2)), Can get output of  this function filtered with filter app?

--- End quote ---
Yes and no. The filtering comes before the math operation.

--- End quote ---

Thanks for your answer, I would have liked to buy this oscilloscope  for atan function and filter, I think only Pico scopes has this function, perhaps R&S too, but for good price like this scope would be excellent buy option,  in user manual math mode and filter function it comes bad explained, you don't can know more for example how filter can work with math channel.

WI_Hedgehog:
I cannot find a way to set the Date/Time. I checked everything under the Utility menu without success. The scope readings recorded to USB drive therefore have a timestamp of 12/31/1979_11:00PM, which isn't exactly great from a recordkeeping standpoint.

tautech:

--- Quote from: WI_Hedgehog on June 04, 2023, 08:40:25 pm ---I cannot find a way to set the Date/Time. I checked everything under the Utility menu without success. The scope readings recorded to USB drive therefore have a timestamp of 12/31/1979_11:00PM, which isn't exactly great from a recordkeeping standpoint.

--- End quote ---
Barely any 1000 series scopes of any brand offer a RTC.

mwb1100:
The GDS-1000B Series User Manual  has this to say about setting the date/time:


--- Quote ---System Settings and Miscellaneous Settings

This section describes how to set the interface, language, time/date,
probe compensation signal, erase the internal memory and access
useful QR codes.
--- End quote ---

But as far as I can tell it never actually documents how to do it (though it does explain in detail how to bring up some QR codes to get you to the GDS-1000B website).  Are you sure you've looked at all the various sub-menus of the Utility menu?  I don't have a GDS-1054B, so I'm no help beyond what the manual says - or doesn't say.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod