Author Topic: Hantek MSO5202D "self calibration failed, error x10b00"  (Read 556 times)

0 Members and 1 Guest are viewing this topic.

Offline alper

  • Newbie
  • Posts: 3
  • Country: tr
Hantek MSO5202D "self calibration failed, error x10b00"
« on: July 27, 2019, 01:31:49 pm »
Hantek MSO5202D calibration while "Self calibration failed, error 10b00" error and I can not use the second channel.Firmware file can not find.Please help. sw version 3.2.35(161017.0)





« Last Edit: July 27, 2019, 01:48:11 pm by alper »
 

Offline tinhead

  • Super Contributor
  • ***
  • Posts: 1914
  • Country: 00
    • If you like my hacks, send me a donation
Re: Hantek MSO5202D "self calibration failed, error x10b00"
« Reply #1 on: July 27, 2019, 02:05:39 pm »
that might be Hardware error, maybe Hantek can tell you more about, ask them on their official Forum https://eediscuss.com/forum.php

ahh i see, you did it already
I don't want to be human! I want to see gamma rays, I want to hear X-rays, and I want to smell dark matter ...
I want to reach out with something other than these prehensile paws and feel the solar wind of a supernova flowing over me.
 

Offline alper

  • Newbie
  • Posts: 3
  • Country: tr
Re: Hantek MSO5202D "self calibration failed, error x10b00"
« Reply #2 on: July 27, 2019, 06:11:47 pm »
  :scared:  :scared:  I bought new and I wanted to calibrate without taking any measurements and it is possible to be from the hardware that gave the error?
 

Offline tinhead

  • Super Contributor
  • ***
  • Posts: 1914
  • Country: 00
    • If you like my hacks, send me a donation
Re: Hantek MSO5202D "self calibration failed, error x10b00"
« Reply #3 on: July 27, 2019, 06:15:59 pm »
  :scared:  :scared:  I bought new and I wanted to calibrate without taking any measurements and it is possible to be from the hardware that gave the error?

sure, new Hardware can be always broken, so send it back to seller
I don't want to be human! I want to see gamma rays, I want to hear X-rays, and I want to smell dark matter ...
I want to reach out with something other than these prehensile paws and feel the solar wind of a supernova flowing over me.
 

Offline alper

  • Newbie
  • Posts: 3
  • Country: tr
Re: Hantek MSO5202D "self calibration failed, error x10b00"
« Reply #4 on: August 19, 2019, 09:21:10 pm »


 i changed d02_1 diod and everthing is ok. Ch_2 is working and self calibration ok.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf