EEVblog Electronics Community Forum
Products => Test Equipment => Topic started by: ddavidebor on March 26, 2013, 10:26:37 pm
-
Hi
I've seen this meter http://www.goodluckbuy.com/prova-801-digital-multi-meter-rs-232c-interface-bandwidth-of-10khz-max-.html
Look at this thing!!! It's 2 60000 count meter in one!
If it has good internal quality, it will be a fantastic merer...
Anyone has it?
-
Holy Karp!
That looks a little (read: a whole freaking lot) too good to be true. Look at the AC accuracy! And it comes *with* the RS232 hookups and software?!
Feel free to buy, test and let us all know ;) (jk)
-
PROVA are very nice stuff (I've used their TrueRMS Clamp Meters) .. but is this genuine or a copy?
While I was looking at that page, I did drool over the Rigol DM3051 :-) grrrrrr
-
https://www.eevblog.com/forum/testgear/prova-903-discussion (https://www.eevblog.com/forum/testgear/prova-903-discussion)
I have the 803. The 800 series is not True RMS. The 900 series is but they are quite a bit more expensive.
Oh and BTW, this is Taiwanese, not Chinese. There's a difference there :)
Hi
I've seen this meter http://www.goodluckbuy.com/prova-801-digital-multi-meter-rs-232c-interface-bandwidth-of-10khz-max-.html (http://www.goodluckbuy.com/prova-801-digital-multi-meter-rs-232c-interface-bandwidth-of-10khz-max-.html)
Look at this thing!!! It's 2 60000 count meter in one!
If it has good internal quality, it will be a fantastic merer...
Anyone has it?
-
I suspect that the specs are a bit "optimistic", at that price.
-
Holy Karp!
That looks a little (read: a whole freaking lot) too good to be true. Look at the AC accuracy! And it comes *with* the RS232 hookups and software?!
Feel free to buy, test and let us all know ;) (jk)
It saids "Application Software (Option) ", I suspect the "(Option)" there means optional and you have to pay extra for it.
EDIT - missed this when I cut it just before Save:
I like the meter, particularly the dual channel part.
I hope this meter lives up to its billing here. Looks like a nice data collection device.
-
Holy Karp!
That looks a little (read: a whole freaking lot) too good to be true. Look at the AC accuracy! And it comes *with* the RS232 hookups and software?!
Feel free to buy, test and let us all know ;) (jk)
It saids "Application Software (Option) ", I suspect the "(Option)" there means optional and you have to pay extra for it.
EDIT - missed this when I cut it just before Save:
I like the meter, particularly the dual channel part.
I hope this meter lives up to its billing here. Looks like a nice data collection device.
Given that and that it's not true RMS (somehow missed that) brings the specs vs price back into reality. If Brymen is any example (own two 867s, which are awesome), Taiwanese is very different from Chinese. If the build quality is good, these look like a sweet deal.
As an aside, Brymen's the only company who's data acquisition and interface option for a DMM is actually reasonably priced (that I've encountered), other brands, even the Brymen rebrands are practically theft imho
-
Yes, you're right. The specs are too good to be true.
In fact, is still a nice datalogging dmm with a computer.
I'm these days looking at various strange dmm... There's also in this site some nice mastech.
-
Hmm, a big GOTCHA for these types of "dual" meters is the fact that they must share a common ground connection. So it is not immediately easy/possible to measure both the current and voltage in some circuits, for example. Not as flexible as two separate meters.
No mention of CAT ratings? Not sure I'd believe them even if they were given, at this price. I see it includes a "10A Fast Blown Fuse" :0 That would save me the trouble of blowing it...
I would also generally avoid ANYTHING with the name "Pro" embedded anywhere in the description or part number, because it usually gaurantees that the item isn't...
Second channel accuracy looks to be somewhat nobbled? Hey-ho. Maybe OK for amatuer use, provided you never drop it.
-
Hmm, a big GOTCHA for these types of "dual" meters is the fact that they must share a common ground connection. So it is not immediately easy/possible to measure both the current and voltage in some circuits, for example. Not as flexible as two separate meters.
Good point! I didn't think of that.
-
Hmm, a big GOTCHA for these types of "dual" meters is the fact that they must share a common ground connection.
Why must they do that? ???
-
Because otherwise you would need to build two complete meters inside one case.
-
Because otherwise you would need to build two complete meters inside one case.
Which is what they ought to. If they were serious about it, that is.
-
Hmm, a big GOTCHA for these types of "dual" meters is the fact that they must share a common ground connection.
Dual? How about Quad? Daetron makes some but with same limitation of common ground.
http://www.ko4bb.com/Manuals/11 (http://www.ko4bb.com/Manuals/11))_Stuff_Not_Sorted/Daetron/Daetron_General_Catalog.PDF
-
Well, if they're going to put two meters in the same case, then you might as well buy two meters and skip paying the novelty price.
FWIW, even my Fluke bench meter (Fluke 45) has a dual display mode, and it's even more limited because not only do the two channels share ground, there is still only one V input. You can display V/mA, VAC/Hz, VDC/VAC, and a few other combinations. Still, I've found it useful.
-
Hmm, a big GOTCHA for these types of "dual" meters is the fact that they must share a common ground connection. So it is not immediately easy/possible to measure both the current and voltage in some circuits, for example. Not as flexible as two separate meters.
I can't think of many cases where having a common would be a major problem - OK you'd probably end up seeing -ve voltage & current with common + source connection, but that would be a lot more useful then the normal either-or configuration on most meters.
-
Hmm, a big GOTCHA for these types of "dual" meters is the fact that they must share a common ground connection.
Why must they do that? ???
Guess work only on my part: I suspect they also share the A to D converter since the accuracy drops - rather, the error doubles in dual mode according to the spec. So I suspect they are time sharing the A to D and with shorter sampling time, it is shorter on accuracy.
-
Well, if they're going to put two meters in the same case, then you might as well buy two meters and skip paying the novelty price.
FWIW, even my Fluke bench meter (Fluke 45) has a dual display mode, and it's even more limited because not only do the two channels share ground, there is still only one V input. You can display V/mA, VAC/Hz, VDC/VAC, and a few other combinations. Still, I've found it useful.
I've got a Fluke 45, and I find it useful to display the max voltage on one display and the real time voltage on the other. Or use relative mode to monitor the real time and the change. Otherwise I'd just use two.
-
I wonder if they will let Dave tear one down, if its for real, he can't call it a wun hung lo, or can he !!!!!!!!!!