Products > Test Equipment
Adapter iFak isCAN USB DIY
(1/1)
Postal2:
You can make this expensive adapter from cheap components. Sorry for schematic quality, have no time.
simba15:
Can we know more?

Diy Can adapter would be useful!

Postal2:
I made it for various vendors software, works fine. What exactly you need to know? I seem schematic is readable, need to be some advanced of course.
simba15:
I see the schematic , but I am unsure of the main IC's used.

What are the modules shown in the pictures? seems to simply the assembly.

Any firmware required?

Thanks.
Postal2:
Main IC is accordingly to filename is CY7C68013A-128 (cheap). Small ICs are SN74LVC1G02 (74AHC2G08 is not need and was bypassed). Schematic is reverse-engineered from working device.
Firmware is there in file "iic" - it is for eeprom, as usually for fx2lp.

Small module is SJA1000 module, but need change crystal to 24MHz (it is more stable). Constantly powered. Isolation not used.
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod