Products > Test Equipment
Adapter iFak isCAN USB DIY
(1/1)
Postal2:
You can make this expensive adapter from cheap components. Sorry for schematic quality, have no time.
simba15:
Can we know more?
Diy Can adapter would be useful!
Postal2:
I made it for various vendors software, works fine. What exactly you need to know? I seem schematic is readable, need to be some advanced of course.
simba15:
I see the schematic , but I am unsure of the main IC's used.
What are the modules shown in the pictures? seems to simply the assembly.
Any firmware required?
Thanks.
Postal2:
Main IC is accordingly to filename is CY7C68013A-128 (cheap). Small ICs are SN74LVC1G02 (74AHC2G08 is not need and was bypassed). Schematic is reverse-engineered from working device.
Firmware is there in file "iic" - it is for eeprom, as usually for fx2lp.
Small module is SJA1000 module, but need change crystal to 24MHz (it is more stable). Constantly powered. Isolation not used.
Navigation
[0] Message Index
Go to full version