Author Topic: Agilent 33220A 20 Mhz Function/Arb WF Gen : two questions  (Read 484 times)

0 Members and 1 Guest are viewing this topic.

Offline ytterligareTopic starter

  • Regular Contributor
  • *
  • Posts: 81
  • Country: it
Agilent 33220A 20 Mhz Function/Arb WF Gen : two questions
« on: April 05, 2023, 02:45:11 pm »
Hello there, my 2nd hand 33220A S/N starts with MY44*

It runs firmware:



While last available FW on keysight site is generically "2.07" build date 2009-08-24.

I'm a bit confused whether mine could be the most up-to-date version available or not, since it reports also "2.06"...anyone can check his ? ( Utility -> Test/Cal -> Cal Info )

Also, anyone did replace the fan on the back and got the specs ? Mine is really noisy and would gladly replace it, say, with a Noctua or any other compatible silent Fan...

Tnx
Andrea
 

Offline gamalot

  • Super Contributor
  • ***
  • Posts: 1397
  • Country: au
  • Correct my English
    • Youtube
Re: Agilent 33220A 20 Mhz Function/Arb WF Gen : two questions
« Reply #1 on: April 05, 2023, 04:32:11 pm »
I think yours has equipped the latest firmware.

The serial number of my 33220A starts with MY43, the latest firmware version for it is 1.08, but as you can see there is also a 1.06 after 1.08.
« Last Edit: April 05, 2023, 04:54:31 pm by gamalot »
I'm a poet, I didn't even know it. |  https://youtube.com/@gamalot | https://github.com/gamalot
 
The following users thanked this post: ytterligare


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf