Products > Test Equipment
Agilent 54835A scope (4 channel 1GHz / 4Gs/s) repair & uphack
<< < (78/80) > >>
Tony_G:
Hey All,

For anyone coming here in the future, I've created a single ISO that contains:


* HP Scope Recovery Image A.04.30 (use ghost.exe to restore the image)
* HP Scope Upgrade to A.04.50 (load the mouse driver and run cdromupg.exe)
* Floppy Boot Image with MicroSolutions Backpack Drivers (I use WinImage to write these boot images to a floppy)
* Floppy Boot Image for Windows 98 SE (this is just the standard disk from the Win98 product)
* Patcher9x-0.8.50 Boot Image to patch Win9X to work in a VM or more modern CPU hardware)The file is "HPScope4X.iso" and you can get it directly here or from the link I shared earlier in this thread.

Hope this helps.

TonyG
Tony_G:

--- Quote from: BoscoLab on November 30, 2023, 10:56:56 am ---Now I'm just looking for the latest software for the 54832B.

--- End quote ---

Did you try the recovery ISO at "54845A\548xx\Upg_Rec\5483x" - 5483XRecovery2_1.iso?

If you did, then unfortunately I can't help further as I never had one of those scopes to try it on.

Sorry.

TonyG
BoscoLab:

--- Quote from: Tony_G on December 01, 2023, 06:26:40 pm ---
--- Quote from: BoscoLab on November 30, 2023, 10:56:56 am ---Now I'm just looking for the latest software for the 54832B.

--- End quote ---

Did you try the recovery ISO at "54845A\548xx\Upg_Rec\5483x" - 5483XRecovery2_1.iso?

If you did, then unfortunately I can't help further as I never had one of those scopes to try it on.

Sorry.

TonyG

--- End quote ---

I have successfully used the recovery ISO at "54845A\548xx\Upg_Rec\5483x" - 5483XRecovery2_1.iso on the Agilent 54832B. Then booted the update directly from CD and installed it. Here is a screenshot after the installation and update. The self-test and calibration was successful.

Thanks Tony! :)

Tony_G:
Congrats - Did you get the 54845A up to A.04.50 as well?

TonyG
BoscoLab:

--- Quote from: Tony_G on December 03, 2023, 02:56:45 pm ---Congrats - Did you get the 54845A up to A.04.50 as well?

TonyG

--- End quote ---

I have not yet updated the 54845A. Could I change the CD drive letter to F after booting the floppy disk? Or do you suggest something else?

Rudolf
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod