EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: maat on July 27, 2020, 08:20:20 pm

Title: Agilent 6632B Binding posts
Post by: maat on July 27, 2020, 08:20:20 pm
I have quite a few HP/Agilent 6632B in the lab and would like to convert them from rear panel outputs to front panel outputs. To do that I would like to replicate the option 020 A4 board. I found the schematics on p.77 in the service manual, but unfortunately the BOM on p.71 does not list the 4 inductors L601-L604. Does anybody out there have an original 6633B, 6634B, 6632B, or 66332A with 020? I would be very grateful if somebody would share the value of those inductors.
Title: Re: Agilent 6632B Binding posts
Post by: maat on October 23, 2020, 11:02:21 pm
I finally got around to design a PCB to mount 5 binding posts to the front panel of my 6632Bs. I now have the outputs, sense connections and the chasis ground wired to the front.

[attachimg=1]
In case someone is interested, I have but the design files on Github: https://github.com/PatrickBaus/HP6632B_binding_posts. I will update the github repo with the assembly instructions in the next couple of days.