« previous next »
Pages: [1]   Go Down

Author Topic: Fluke 8810A info needed  (Read 3015 times)

0 Members and 1 Guest are viewing this topic.

Offline BillWojoTopic starter

  • Regular Contributor
  • *
  • Posts: 116
  • Country: us
Fluke 8810A info needed
« on: July 05, 2014, 03:27:08 am »
Digging through my old junk I found an old Fluke 8810A meter. I think it has problems as it seems to want to flash 18.88888 on some of the settings. I have some old test leads I need to dig up but does anybody have a manual for this thing?
Thanks
BillWojo
Logged
 

Offline xwarp

  • Frequent Contributor
  • **
  • Posts: 367
  • Country: us
Re: Fluke 8810A info needed
« Reply #1 on: July 05, 2014, 03:37:29 am »
I'd say there were problems if your 5.5 digit meter displayed 7 digits.... :-DD

http://www.ko4bb.com/Manuals/Fluke/Fluke_8810A_Digital_Multimeter_Instructrion_Manual.pdf
Logged
 

Offline BillWojoTopic starter

  • Regular Contributor
  • *
  • Posts: 116
  • Country: us
Re: Fluke 8810A info needed
« Reply #2 on: July 05, 2014, 04:00:16 am »
Actually I just went and plugged it back in. Reads +188.888 and flashing. That can change depending on what mode it's in. I figured that if it's flashing it's not happy. But what do I know?
BillWojo
Logged
 

Offline gizmoco

  • Newbie
  • Posts: 6
Re: Fluke 8810A info needed
« Reply #3 on: July 05, 2014, 06:36:28 pm »
You're probably selecting a function that's not available on your meter.

Resistance and AC functions were optional. Read Section 6 of the Manual.
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee