Products > Test Equipment
Agilent DSOX3054A not booting possible NAND corruption HELP! (RESOLVED)
analogRF:
--- Quote from: Bud on February 06, 2021, 03:45:07 pm ---
--- Code: --- doesn't support IOCTL_HAL_GET_DEVICE_INFO::SPI_GETBOOTMENAME
Failed to start/configure network.
Time for NANDFLASH to load: 0 ms.
Time for SNANDFLASH to load: 0 ms.
Time for USB Hard Disk Drive to load: 0 ms.
Starting ProcessStartupFolder
ProcessStartupFolder: \usb\Startup\
running \usb\Startup\infiniivision.lnk...
--- End code ---
Based on the log, the FPGA was initialized fine, and Windows loaded as well. There was an error configuring the LAN so you may not be able to use a LAN card.
--- End quote ---
yes, I also think that there might be a problem with the Network interface and LAN card will not work
Bud:
Perhaps the Windows Registry is corrupted elsewhere in NAND. You may need to reinstall Infiniivision application (the nb0 file only contains windows kernel). But it is difficult because the scope is blind (no display) and LAN may not work either.
I would suggest trying making a USB stick with infiniivisionStartupOverride.txt (just an empty file) in the root folder and put the application files on it. The scope then will boot from USB. Try following this post:
https://www.eevblog.com/forum/testgear/dsox2000-and-3000-series-licence-have-anyone-tried-to-hack-that-scope/msg366721/#msg366721
Bud:
--- Quote from: analogRF on February 06, 2021, 05:45:48 pm ---
--- Quote from: tv84 on February 06, 2021, 05:06:58 pm ---
--- Quote from: analogRF on February 06, 2021, 04:15:22 pm ---one problem with this method is that the python tool that is used in place of wince cab manager to create the correct file names from the extracted infiniivisionSetup.cab leaves out one file (INFINI~1.000) and it is because this name does not actually exist in the _setup.xml file so I think an important component of the infiniivisionSetup might be missing on the USB
--- End quote ---
If that is the case even the official tool wouldn't be able to recreate the filename! I find that strange.
--- End quote ---
yes, but that's how it is. I checked multiple times with multiple firmware images, that file's name does not exist in the _setup.xml
but it think it must be a needed component...i don;t know how the system could decipher its name...it's a binary file but by looking at some of the words that appear in the content it seems to me it's a important component....maybe it belongs to 2000A scopes??
or maybe it the source of my display problem??
--- End quote ---
The .000 file has the description of the CAB folder structure, registry keys and stuff. It is not an application file and is only needed to unpack the CAB.
analogRF:
:D :D :D ;D ;D ;D
Scope is fixed and up and running :D :D
Now go back to the long thread and look for option enabling methods :popcorn: :-/O :-/O
here is the story
Thanks to "Bud" I was sure the firmware on the unit was 2.30 so I prepared the USB and nk.nb0 based on "titiris" instructions here (msg # 2092)
https://www.eevblog.com/forum/testgear/dsox2000-and-3000-series-licence-have-anyone-tried-to-hack-that-scope/msg2136181/?topicseen#msg2136181
well, it didn't work. Behaved exactly like the 2.35 that I posted the log before.
so I realized that perhaps I should modify the \usb\Startup\infiniivision.lnk file to have this line 51#\usb\Secure\infiniiVision\infiniivisionLauncher.exe instead of what 'titiris' had said (48#\Secure\infiniiVision\infiniivisionLauncher.exe) (by the way 48 must be 47 but it didnt help anyway)
after that, I uploaded the nk.nb0 again and ran the go command and scope started :-+ but no display :-- |O I knew the scope was functioning but screen was dark.
to my embarrassment I found that the small ribbon cable (see the attached picture) was slightly out and was not making conneciton :-[ :-[
so I fixed that and again took me 30 minutes to upload the nk.nb0 again with YMODEM and BINGOOOOO :phew: :phew:
scope worked - see the picture :) :)
I think I made a huge mistake and upgraded the firmware to 2.60 (well first to 2.35 and then to 2.41 and then to 2.50 and then to 2.60)
scope boots perfectly fine now and works except two of the softkey buttons under the screen (number 3 and 6)
but now I realize to hack the options I should have stayed with V2.35, am I right?? :palm: :palm: :palm:
can someone point me to a method to enable the options with 2.60 FW please?
by the way I have the console logs of all booting from various firmwares and also console logs during firmware upgrades. I post two of them here
but if someone is looking for console logs let me know
--- Code: ---================ scope is running with V2.50 and I start FW upgrade to 2.60 here===========================================
============================================================================================================================
** BEGIN ** ExtractFileFromCabFile: RECIPE.XML
** END ** ExtractFileFromCabFile: RECIPE.XML: 51 ms
PRE: "" -> ""
** BEGIN ** ExtractFileFromCabFile: infiniiVisionSetup.cab
** END ** ExtractFileFromCabFile: infiniiVisionSetup.cab: 16652 ms
** BEGIN ** ExtractFileFromCabFile: _setup.xml
** END ** ExtractFileFromCabFile: _setup.xml: 45 ms
** BEGIN ** ExtractFileFromCabFile: INFINI~1.176
** END ** ExtractFileFromCabFile: INFINI~1.176: 42 ms
SHIM DLL, LoadRealDll [PalSStorage.dll] for [AgilentPalSStorage.dll]
SHIM [AgilentPalSStorage.dll] Get Process Addresses
** BEGIN ** ExtractFileFromCabFile: RECIPE.XML
** END ** ExtractFileFromCabFile: RECIPE.XML: 25 ms
PRE: "" -> ""
SHIM DLL, LoadRealDll [PalSStorage.dll] for [AgilentPalSStorage.dll]
SHIM [AgilentPalSStorage.dll] Get Process Addresses
** BEGIN ** ExtractFileFromCabFile: RECIPE.XML
** END ** ExtractFileFromCabFile: RECIPE.XML: 19 ms
PRE: "" -> ""
** BEGIN ** ExtractFileFromCabFile: updateSplashImage.wvga.bin
** END ** ExtractFileFromCabFile: updateSplashImage.wvga.bin: 8 ms
GetNextUsbEvent, bOpenContextClosing
EventThread, ERROR ABORTED or INVALID HANDLE, exiting
GetSetupPacket, tmcDriverClosing 2
** BEGIN ** ExtractFileFromCabFile: auxInstallStep.exe
** END ** ExtractFileFromCabFile: auxInstallStep.exe: 404 ms
** BEGIN ** ProcessRecipeStep: \TEMP\{6A9868B0-CBCE-9EDE-AF1B-E43FEE72A8BA}\auxInstallStep.exe -v
=== Aux Step: -v ===
Skipped.
** END ** ProcessRecipeStep: \TEMP\{6A9868B0-CBCE-9EDE-AF1B-E43FEE72A8BA}\auxInstallStep.exe -v: 22 ms
** BEGIN ** ExtractFileFromCabFile: nk.bin.comp
** END ** ExtractFileFromCabFile: nk.bin.comp: 7128 ms
** BEGIN ** ProcessRecipeStep: \windows\loadP500Flash -u ceImage2 \TEMP\{6A9868B0-CBCE-9EDE-AF1B-E43FEE72A8BA}\nk.bin.comp
SHIM DLL, LoadRealDll [PalSysManagement.dll] for [AgilentPalSysManagement.dll]
SHIM [AgilentPalSysManagement.dll] Get Process Addresses
FWUpdate: image 3 value not defined
0.000000 complete (Erasing)
100.000000 complete (Erasing)
0.000000 complete (Writing)
2.545321 complete (Writing)
5.090642 complete (Writing)
7.635963 complete (Writing)
10.181284 complete (Writing)
12.726605 complete (Writing)
15.271926 complete (Writing)
17.817247 complete (Writing)
20.362568 complete (Writing)
22.907889 complete (Writing)
25.453210 complete (Writing)
27.998531 complete (Writing)
30.543852 complete (Writing)
33.089173 complete (Writing)
35.634494 complete (Writing)
38.179815 complete (Writing)
40.725136 complete (Writing)
43.270457 complete (Writing)
45.815778 complete (Writing)
48.361099 complete (Writing)
50.906420 complete (Writing)
53.451741 complete (Writing)
55.997062 complete (Writing)
58.542383 complete (Writing)
61.087704 complete (Writing)
63.633025 complete (Writing)
66.178346 complete (Writing)
68.723667 complete (Writing)
71.268988 complete (Writing)
73.814309 complete (Writing)
76.359630 complete (Writing)
78.904951 complete (Writing)
81.450272 complete (Writing)
83.995593 complete (Writing)
86.540914 complete (Writing)
89.086235 complete (Writing)
91.631556 complete (Writing)
94.176877 complete (Writing)
96.722198 complete (Writing)
99.267519 complete (Writing)
100.000000 complete (Writing)
0.000000 complete (Verifying)
2.545321 complete (Verifying)
5.090642 complete (Verifying)
7.635963 complete (Verifying)
10.181284 complete (Verifying)
12.726605 complete (Verifying)
15.271926 complete (Verifying)
17.817247 complete (Verifying)
20.362568 complete (Verifying)
22.907889 complete (Verifying)
25.453210 complete (Verifying)
27.998531 complete (Verifying)
30.543852 complete (Verifying)
33.089173 complete (Verifying)
35.634494 complete (Verifying)
38.179815 complete (Verifying)
40.725136 complete (Verifying)
43.270457 complete (Verifying)
45.815778 complete (Verifying)
48.361099 complete (Verifying)
50.906420 complete (Verifying)
53.451741 complete (Verifying)
55.997062 complete (Verifying)
58.542383 complete (Verifying)
61.087704 complete (Verifying)
63.633025 complete (Verifying)
66.178346 complete (Verifying)
68.723667 complete (Verifying)
71.268988 complete (Verifying)
73.814309 complete (Verifying)
76.359630 complete (Verifying)
78.904951 complete (Verifying)
81.450272 complete (Verifying)
83.995593 complete (Verifying)
86.540914 complete (Verifying)
89.086235 complete (Verifying)
91.631556 complete (Verifying)
94.176877 complete (Verifying)
96.722198 complete (Verifying)
99.267519 complete (Verifying)
100.000000 complete (Verifying)
** END ** ProcessRecipeStep: \windows\loadP500Flash -u ceImage2 \TEMP\{6A9868B0-CBCE-9EDE-AF1B-E43FEE72A8BA}\nk.bin.comp: 8084 ms
** BEGIN ** ExtractFileFromCabFile: updateBootLoaders2.exe
** END ** ExtractFileFromCabFile: updateBootLoaders2.exe: 317 ms
** BEGIN ** ExtractFileFromCabFile: pboot_rel.bin
** END ** ExtractFileFromCabFile: pboot_rel.bin: 352 ms
** BEGIN ** ProcessRecipeStep: \TEMP\{6A9868B0-CBCE-9EDE-AF1B-E43FEE72A8BA}\updatebootloaders2.exe
Update XLOADER at address f8000000.
XLOADER is up to date. Skipping
Update UBOOT at address f8010000.
UBOOT is up to date. Skipping
Update PBOOT at address f8050000.
PBOOT is up to date. Skipping
** END ** ProcessRecipeStep: \TEMP\{6A9868B0-CBCE-9EDE-AF1B-E43FEE72A8BA}\updatebootloaders2.exe: 95 ms
** BEGIN ** ExtractFileFromCabFile: nk.bin.comp
** END ** ExtractFileFromCabFile: nk.bin.comp: 7103 ms
** BEGIN ** ProcessRecipeStep: \windows\loadP500Flash -u ceImage1 \TEMP\{6A9868B0-CBCE-9EDE-AF1B-E43FEE72A8BA}\nk.bin.comp
SHIM DLL, LoadRealDll [PalSysManagement.dll] for [AgilentPalSysManagement.dll]
SHIM [AgilentPalSysManagement.dll] Get Process Addresses
0.000000 complete (Erasing)
100.000000 complete (Erasing)
0.000000 complete (Writing)
2.545321 complete (Writing)
5.090642 complete (Writing)
7.635963 complete (Writing)
10.181284 complete (Writing)
12.726605 complete (Writing)
15.271926 complete (Writing)
17.817247 complete (Writing)
20.362568 complete (Writing)
22.907889 complete (Writing)
25.453210 complete (Writing)
27.998531 complete (Writing)
30.543852 complete (Writing)
33.089173 complete (Writing)
35.634494 complete (Writing)
38.179815 complete (Writing)
40.725136 complete (Writing)
43.270457 complete (Writing)
45.815778 complete (Writing)
48.361099 complete (Writing)
50.906420 complete (Writing)
53.451741 complete (Writing)
55.997062 complete (Writing)
58.542383 complete (Writing)
61.087704 complete (Writing)
63.633025 complete (Writing)
66.178346 complete (Writing)
68.723667 complete (Writing)
71.268988 complete (Writing)
73.814309 complete (Writing)
76.359630 complete (Writing)
78.904951 complete (Writing)
81.450272 complete (Writing)
83.995593 complete (Writing)
86.540914 complete (Writing)
89.086235 complete (Writing)
91.631556 complete (Writing)
94.176877 complete (Writing)
96.722198 complete (Writing)
99.267519 complete (Writing)
100.000000 complete (Writing)
0.000000 complete (Verifying)
2.545321 complete (Verifying)
5.090642 complete (Verifying)
7.635963 complete (Verifying)
10.181284 complete (Verifying)
12.726605 complete (Verifying)
15.271926 complete (Verifying)
17.817247 complete (Verifying)
20.362568 complete (Verifying)
22.907889 complete (Verifying)
25.453210 complete (Verifying)
27.998531 complete (Verifying)
30.543852 complete (Verifying)
33.089173 complete (Verifying)
35.634494 complete (Verifying)
38.179815 complete (Verifying)
40.725136 complete (Verifying)
43.270457 complete (Verifying)
45.815778 complete (Verifying)
48.361099 complete (Verifying)
50.906420 complete (Verifying)
53.451741 complete (Verifying)
55.997062 complete (Verifying)
58.542383 complete (Verifying)
61.087704 complete (Verifying)
63.633025 complete (Verifying)
66.178346 complete (Verifying)
68.723667 complete (Verifying)
71.268988 complete (Verifying)
73.814309 complete (Verifying)
76.359630 complete (Verifying)
78.904951 complete (Verifying)
81.450272 complete (Verifying)
83.995593 complete (Verifying)
86.540914 complete (Verifying)
89.086235 complete (Verifying)
91.631556 complete (Verifying)
94.176877 complete (Verifying)
96.722198 complete (Verifying)
99.267519 complete (Verifying)
100.000000 complete (Verifying)
** END ** ProcessRecipeStep: \windows\loadP500Flash -u ceImage1 \TEMP\{6A9868B0-CBCE-9EDE-AF1B-E43FEE72A8BA}\nk.bin.comp: 8081 ms
** BEGIN ** ExtractFileFromCabFile: fpga2000a.bin
** END ** ExtractFileFromCabFile: fpga2000a.bin: 102 ms
** BEGIN ** ProcessRecipeStep: \windows\loadP500Flash -u fpga --target economy \TEMP\{6A9868B0-CBCE-9EDE-AF1B-E43FEE72A8BA}\fpga2000a.bin
Hardware does not match the specified target (-t).
FPGA update failed!
** END ** ProcessRecipeStep: \windows\loadP500Flash -u fpga --target economy \TEMP\{6A9868B0-CBCE-9EDE-AF1B-E43FEE72A8BA}\fpga2000a.bin: 392 ms
** BEGIN ** ExtractFileFromCabFile: fpga3000a.bin
** END ** ExtractFileFromCabFile: fpga3000a.bin: 231 ms
** BEGIN ** ProcessRecipeStep: \windows\loadP500Flash -u fpga --target performance \TEMP\{6A9868B0-CBCE-9EDE-AF1B-E43FEE72A8BA}\fpga3000a.bin
SHIM DLL, LoadRealDll [PalSysManagement.dll] for [AgilentPalSysManagement.dll]
SHIM [AgilentPalSysManagement.dll] Get Process Addresses
** END ** ProcessRecipeStep: \windows\loadP500Flash -u fpga --target performance \TEMP\{6A9868B0-CBCE-9EDE-AF1B-E43FEE72A8BA}\fpga3000a.bin: 681 ms
** BEGIN ** ExtractFileFromCabFile: cleanupFileSystem.exe
** END ** ExtractFileFromCabFile: cleanupFileSystem.exe: 285 ms
** BEGIN ** ProcessRecipeStep: \TEMP\{6A9868B0-CBCE-9EDE-AF1B-E43FEE72A8BA}\cleanupFileSystem.exe
**** CleanupInfiniiVisionFolder ****
**** CleanupInfiniiVisionFolder ****
**** CleanupInfiniiVisionFolder ****
**** CleanupInfiniiVisionFolder ****
**** CleanupInfiniiVisionFolder ****
DELETED: \secure\infiniiVision\web\Lxi\Identification\Default.asp
DELETED: \secure\infiniiVision\web\Lxi\Identification\LXIIdentification.xsd
DELETED: \secure\infiniiVision\web\Lxi\Identification\
DELETED: \secure\infiniiVision\web\Lxi\
**** CleanupInfiniiVisionFolder ****
**** CleanupInfiniiVisionFolder ****
DELETED: \secure\infiniiVision\web\include\web-socket-js\WebSocketMain.swf
DELETED: \secure\infiniiVision\web\include\web-socket-js\swfobject.js
DELETED: \secure\infiniiVision\web\include\web-socket-js\web_socket.min.js
DELETED: \secure\infiniiVision\web\include\web-socket-js\
DELETED: \secure\infiniiVision\web\include\vnc.min.js
DELETED: \secure\infiniiVision\web\include\
**** CleanupInfiniiVisionFolder ****
DELETED: \secure\infiniiVision\web\css\AGBD____.TTF
DELETED: \secure\infiniiVision\web\css\KeysightSansBold.ttf
DELETED: \secure\infiniiVision\web\css\default.min.css
DELETED: \secure\infiniiVision\web\css\
**** CleanupInfiniiVisionFolder ****
DELETED: \secure\infiniiVision\web\help\helpBrowserWebControl.asp
DELETED: \secure\infiniiVision\web\help\helpGetImage.asp
DELETED: \secure\infiniiVision\web\help\helpHome.asp
DELETED: \secure\infiniiVision\web\help\helpHomeAdv.asp
DELETED: \secure\infiniiVision\web\help\helpInfoCal.html
DELETED: \secure\infiniiVision\web\help\helpInfoOptions.html
DELETED: \secure\infiniiVision\web\help\helpInfoVersion.asp
DELETED: \secure\infiniiVision\web\help\helpModifyConfig.asp
DELETED: \secure\infiniiVision\web\help\helpNav.asp
DELETED: \secure\infiniiVision\web\help\helpRecall.asp
DELETED: \secure\infiniiVision\web\help\helpRemoteFrontPanel.asp
DELETED: \secure\infiniiVision\web\help\helpRemoteSCPICommands.asp
DELETED: \secure\infiniiVision\web\help\helpSave.asp
DELETED: \secure\infiniiVision\web\help\helpSaveRecall.asp
DELETED: \secure\infiniiVision\web\help\helpStyle.css
DELETED: \secure\infiniiVision\web\help\helpVar.asp
DELETED: \secure\infiniiVision\web\help\helpViewConfig.asp
DELETED: \secure\infiniiVision\web\help\
**** CleanupInfiniiVisionFolder ****
DELETED: \secure\infiniiVision\web\image\IEstep1.png
DELETED: \secure\infiniiVision\web\image\IEstep2.png
DELETED: \secure\infiniiVision\web\image\IEstep3.png
DELETED: \secure\infiniiVision\web\image\IEstep4.png
DELETED: \secure\infiniiVision\web\image\bottomKbLabelWeb.png
DELETED: \secure\infiniiVision\web\image\brand.png
DELETED: \secure\infiniiVision\web\image\down-over.gif
DELETED: \secure\infiniiVision\web\image\down.gif
DELETED: \secure\infiniiVision\web\image\entryLed.png
DELETED: \secure\infiniiVision\web\image\filltrans.gif
DELETED: \secure\infiniiVision\web\image\instrumentBanner.gif
DELETED: \secure\infiniiVision\web\image\instrumentImage.jpg
DELETED: \secure\infiniiVision\web\image\kbLabel2ChanWeb.png
DELETED: \secure\infiniiVision\web\image\kbLabel4ChanWeb.png
DELETED: \secure\infiniiVision\web\image\keyboard.gif
DELETED: \secure\infiniiVision\web\image\labelPanelWeb.png
DELETED: \secure\infiniiVision\web\image\line-heading.gif
DELETED: \secure\infiniiVision\web\image\lxi.jpg
DELETED: \secure\infiniiVision\web\image\m2XX2A.jpg
DELETED: \secure\infiniiVision\web\image\m2XX4A.jpg
DELETED: \secure\infiniiVision\web\image\m3XX2A.jpg
DELETED: \secure\infiniiVision\web\image\m3XX4A.jpg
DELETED: \secure\infiniiVision\web\image\popupMenu.jpg
DELETED: \secure\infiniiVision\web\image\popupMenu_wvga.jpg
DELETED: \secure\infiniiVision\web\image\rightKbLabelWeb.png
DELETED: \secure\infiniiVision\web\image\runStop.png
DELETED: \secure\infiniiVision\web\image\single.png
DELETED: \secure\infiniiVision\web\image\softkey.jpg
DELETED: \secure\infiniiVision\web\image\softkey_wvga.jpg
DELETED: \secure\infiniiVision\web\image\splash.png
DELETED: \secure\infiniiVision\web\image\splashLoad.png
DELETED: \secure\infiniiVision\web\image\splashSorry.png
DELETED: \secure\infiniiVision\web\image\touchIcon.png
DELETED: \secure\infiniiVision\web\image\up-over.gif
DELETED: \secure\infiniiVision\web\image\up.gif
DELETED: \secure\infiniiVision\web\image\waveNarrow.png
DELETED: \secure\infiniiVision\web\image\waveShort.png
DELETED: \secure\infiniiVision\web\image\waveTall.png
DELETED: \secure\infiniiVision\web\image\waveWide.png
DELETED: \secure\infiniiVision\web\image\web-enable.png
DELETED: \secure\infiniiVision\web\image\zoom.png
DELETED: \secure\infiniiVision\web\image\
**** CleanupInfiniiVisionFolder ****
DELETED: \secure\infiniiVision\web\lib\edtftpj.jar
DELETED: \secure\infiniiVision\web\lib\plugin.jar
DELETED: \secure\infiniiVision\web\lib\
**** CleanupInfiniiVisionFolder ****
DELETED: \secure\infiniiVision\web\navbar\PantherTabs.psd
DELETED: \secure\infiniiVision\web\navbar\bluebar.gif
DELETED: \secure\infiniiVision\web\navbar\config-down.gif
DELETED: \secure\infiniiVision\web\navbar\config-over.gif
DELETED: \secure\infiniiVision\web\navbar\config.gif
DELETED: \secure\infiniiVision\web\navbar\help-down.gif
DELETED: \secure\infiniiVision\web\navbar\help-over.gif
DELETED: \secure\infiniiVision\web\navbar\help.gif
DELETED: \secure\infiniiVision\web\navbar\image-down.gif
DELETED: \secure\infiniiVision\web\navbar\image-over.gif
DELETED: \secure\infiniiVision\web\navbar\image.gif
DELETED: \secure\infiniiVision\web\navbar\printpage-down.gif
DELETED: \secure\infiniiVision\web\navbar\printpage-over.gif
DELETED: \secure\infiniiVision\web\navbar\printpage.gif
DELETED: \secure\infiniiVision\web\navbar\remote-down.gif
DELETED: \secure\infiniiVision\web\navbar\remote-only.gif
DELETED: \secure\infiniiVision\web\navbar\remote-over.gif
DELETED: \secure\infiniiVision\web\navbar\saverecall-down.gif
DELETED: \secure\infiniiVision\web\navbar\saverecall-over.gif
DELETED: \secure\infiniiVision\web\navbar\saverecall.gif
DELETED: \secure\infiniiVision\web\navbar\status-down.gif
DELETED: \secure\infiniiVision\web\navbar\status-over.gif
DELETED: \secure\infiniiVision\web\navbar\status.gif
DELETED: \secure\infiniiVision\web\navbar\utilities-down.gif
DELETED: \secure\infiniiVision\web\navbar\utilities-over.gif
DELETED: \secure\infiniiVision\web\navbar\utilities.gif
DELETED: \secure\infiniiVision\web\navbar\welcome-down.gif
DELETED: \secure\infiniiVision\web\navbar\welcome-over.gif
DELETED: \secure\infiniiVision\web\navbar\welcome.gif
DELETED: \secure\infiniiVision\web\navbar\
DELETED: \secure\infiniiVision\web\ClickFix.js
DELETED: \secure\infiniiVision\web\CookieUtils.js
DELETED: \secure\infiniiVision\web\InfiniiVision_Quick_Reference.html
DELETED: \secure\infiniiVision\web\appletInstall.jar
DELETED: \secure\infiniiVision\web\appletScpi.jar
DELETED: \secure\infiniiVision\web\appletsVersion.asp
DELETED: \secure\infiniiVision\web\constant.asp
DELETED: \secure\infiniiVision\web\doModifyConfig.asp
DELETED: \secure\infiniiVision\web\doSave.asp
DELETED: \secure\infiniiVision\web\download.asp
DELETED: \secure\infiniiVision\web\enumConst.asp
DELETED: \secure\infiniiVision\web\frontpanel.min.js
DELETED: \secure\infiniiVision\web\getImage.asp
DELETED: \secure\infiniiVision\web\home.html
DELETED: \secure\infiniiVision\web\homeBottom.asp
DELETED: \secure\infiniiVision\web\homeMiddle.asp
DELETED: \secure\infiniiVision\web\homeTop.asp
DELETED: \secure\infiniiVision\web\ieCompat.html
DELETED: \secure\infiniiVision\web\index.asp
DELETED: \secure\infiniiVision\web\infoCal.asp
DELETED: \secure\infiniiVision\web\infoLicense.asp
DELETED: \secure\infiniiVision\web\infoNav.asp
DELETED: \secure\infiniiVision\web\infoVersion.asp
DELETED: \secure\infiniiVision\web\information.html
DELETED: \secure\infiniiVision\web\lanInfo.asp
DELETED: \secure\infiniiVision\web\modifyConfig.asp
DELETED: \secure\infiniiVision\web\navigation.asp
DELETED: \secure\infiniiVision\web\networkStatus.asp
DELETED: \secure\infiniiVision\web\pwdEnum.asp
DELETED: \secure\infiniiVision\web\pwdPrompt.asp
DELETED: \secure\infiniiVision\web\pwdVerify.asp
DELETED: \secure\infiniiVision\web\recall.asp
DELETED: \secure\infiniiVision\web\remoteApplet.asp
DELETED: \secure\infiniiVision\web\remoteSCPICommands.asp
DELETED: \secure\infiniiVision\web\rfp.html
DELETED: \secure\infiniiVision\web\rfp.mf
DELETED: \secure\infiniiVision\web\save.asp
DELETED: \secure\infiniiVision\web\saveFrame.asp
DELETED: \secure\infiniiVision\web\saveRecall.asp
DELETED: \secure\infiniiVision\web\scopeInfo.asp
DELETED: \secure\infiniiVision\web\style.css
DELETED: \secure\infiniiVision\web\toolbarHelp.asp
DELETED: \secure\infiniiVision\web\top.asp
DELETED: \secure\infiniiVision\web\utils.js
DELETED: \secure\infiniiVision\web\viewConfig.asp
DELETED: \secure\infiniiVision\web\
**** CleanupInfiniiVisionFolder ****
DELETED: \secure\infiniiVision\fpga\FPGA2000A.bin
DELETED: \secure\infiniiVision\fpga\FPGA3000A.bin
DELETED: \secure\infiniiVision\fpga\N2750A.bin
DELETED: \secure\infiniiVision\fpga\N2820A.bin
DELETED: \secure\infiniiVision\fpga\gpibFPGA.bin
DELETED: \secure\infiniiVision\fpga\lanFPGA.bin
DELETED: \secure\infiniiVision\fpga\
DELETED: \secure\infiniiVision\SetupConverter.exe
DELETED: \secure\infiniiVision\splashImage.bin
DELETED: \secure\infiniiVision\dnssd_CE.dll
DELETED: \secure\infiniiVision\libcups2.dll
DELETED: \secure\infiniiVision\libcups2backend.dll
DELETED: \secure\infiniiVision\networkPrintFile.exe
DELETED: \secure\infiniiVision\websockify.exe
DELETED: \secure\infiniiVision\infiniiVisionLauncher.exe
DELETED: \secure\infiniiVision\infiniiVisionWebCom.dll
DELETED: \secure\infiniiVision\
**** CleanupInfiniiVisionFolder ****
DELETED: \secure\Startup\infiniivision.lnk
DELETED: \secure\Startup\
**** CleanupInfiniiVisionFolder ****
DELETED: \secure\help\lpkChineseS.lpk
DELETED: \secure\help\lpkChineseT.lpk
DELETED: \secure\help\lpkCzech.lpk
DELETED: \secure\help\lpkFrench.lpk
DELETED: \secure\help\lpkGerman.lpk
DELETED: \secure\help\lpkItalian.lpk
DELETED: \secure\help\lpkJapanese.lpk
DELETED: \secure\help\lpkKorean.lpk
DELETED: \secure\help\lpkPolish.lpk
DELETED: \secure\help\lpkPortuguese.lpk
DELETED: \secure\help\lpkRussian.lpk
DELETED: \secure\help\lpkSpanish.lpk
DELETED: \secure\help\lpkThai.lpk
DELETED: \secure\help\lpkTurkish.lpk
DELETED: \secure\help\
**** CleanupInfiniiVisionFolder ****
DELETED: \secure\bin\
** END ** ProcessRecipeStep: \TEMP\{6A9868B0-CBCE-9EDE-AF1B-E43FEE72A8BA}\cleanupFileSystem.exe: 2899 ms
** BEGIN ** ExtractFileFromCabFile: infiniivisionSetup.cab
** END ** ExtractFileFromCabFile: infiniivisionSetup.cab: 9776 ms
** BEGIN ** ProcessRecipeStep: \windows\wceldcmd.exe /delete 0 \TEMP\{6A9868B0-CBCE-9EDE-AF1B-E43FEE72A8BA}\infiniivisionSetup.cab
** END ** ProcessRecipeStep: \windows\wceldcmd.exe /delete 0 \TEMP\{6A9868B0-CBCE-9EDE-AF1B-E43FEE72A8BA}\infiniivisionSetup.cab: 7903 ms
** BEGIN ** ExtractFileFromCabFile: splashImage.png
** END ** ExtractFileFromCabFile: splashImage.png: 436 ms
** BEGIN ** ProcessRecipeStep: \windows\compileImageForSplashScreen.exe \TEMP\{6A9868B0-CBCE-9EDE-AF1B-E43FEE72A8BA}\SplashImage.png \Secure\InfiniiVision
\splashImage.bin
** END ** ProcessRecipeStep: \windows\compileImageForSplashScreen.exe \TEMP\{6A9868B0-CBCE-9EDE-AF1B-E43FEE72A8BA}\SplashImage.png \Secure\InfiniiVision
\splashImage.bin: 3003 ms
WMT: "", ""
** BEGIN ** ProcessRecipeStep: \windows\rebootInfiniivision.exe
===================================== scope restarts itself with new firmware=======================================================
======================================================================================================================================
U-Boot 2010.03 (Oct 18 2011 - 14:28:06)Agilent P500
CPU: SPEAr600
DRAM: 128 MiB
Flash: 512 KiB
NAND: fsmc-ecc1 128 MiB
In: serial
Out: serial
Err: serial
SerNum:serial number not programmed
Chip: BD Board Rev: 4
Net: smsc
Press space to stop autoboot: 0
## Booting kernel from Legacy Image at f8050000 ...
Image Name: PBOOT
Created: 2015-05-07 8:18:27 UTC
Image Type: ARM Linux Kernel Image (gzip compressed)
Data Size: 37749 Bytes = 36.9 KiB
Load Address: 00000000
Entry Point: 00000000
Uncompressing Kernel Image ... OK
Starting kernel ...
Debug serial initialized ........OK
RTC: 2021-2-6 16:49:58.2 UTC
Microsoft Windows CE Bootloader Common Library Version 1.4 Built May 7 2015 01:38:03
Microsoft Windows CE 6.0 Ethernet Bootloader for the Agilent P500 board
Adaptation performed by Agilent Technologies (c) 2008
System ready!
Preparing for download...
RTC: 2021-2-6 16:49:58.5 UTC
Loading image 1 from memory at 0xD0600000
O
BL_IMAGE_TYPE_BIN
X
XXXXOOOOXXOOOOOOOOXOXOOOOOOOOXOOOXOOOOXXXOOOOOOOOOXOOOOXOXXOXOXXOXOXOXOXXXXOOXXXOOOOOOXXOXXOXXXXXXOOOXXXOOXXOOXXXOOOXOOXOOXXOOXOXOOOOXOXOOOOOXOOOXOOOXXXOXOXXXXXXOXXXX
OOOXOOOXOXOOOOXOOOOXOXOXOOOOOOX
OOOXOOXOOOOXXXOOOOXOOXXOOXOOOOOOOOOXOXOOOXOOOOOOXOXOOOOXOXOOOOOOOXOXOXXOOXOXOOOXOOOXOOXXOXOXOOOXOXXXXXOXOXXXOXXXOXOXXOOOXXXOXXXXXXOXXXXXXXOXXXXOXOXOXOOOXXXXOXXXXXOOOX
XOXX
OOXXOXXXOOXOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOXXOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOXXXXXOXOO
XOXOOOXOXXXXXXXXXXXXXrom_offset=0x0.
XXImageStart = 0x80361000, ImageLength = 0x1ACF7FC, LaunchAddr = 0x80362000
Completed file(s):
-------------------------------------------------------------------------------
[0]: Address=0x80361000 Length=0x1ACF7FC Name="" Target=RAM
Loading image 1 succeeded.
ROMHDR at Address 80361044h
Preparing launch...
RTC: 2021-2-6 16:50:1.40 UTC
Launching windows CE image by jumping at address 0x 362000
Windows CE Kernel for ARM (Thumb Enabled) Built on Mar 8 2013 at 17:05:33
Setting up for a Cold Reboot
Done Setting up for a Cold Reboot
Windows CE Firmware Init
BSP 1.0.0 for the SPEARHEAD600AB board (built Oct 11 2020)
Adaptation performed by ADENEO (c) 2005
+OALIntrInit
-OALIntrInit(rc = 1)
Initialize driver globals Zeros area...
pDrvGlobalArea 0xa0060000 size 0x800 (0xa0060800 -0xa0060000)
Initialize driver globals Zeros area...done
OALKitlStart
Firmware Init Done.
OALIoctlHalEnterI2cCriticalSection init i2c cs
++SER_Init: context Drivers\Active\14
SER_Init, dwIndex:2
SER2 got sysintr:0x00000017
SER2 Serial Port, new baud rate:0x1c200 (UARTCLK:48000000 IBRD:0x1a FBRD:0x2)
OHCI\system.c, GCFG_USBH1_SW_RST
OHCI\system.c, GCFG_USBH2_SW_RST
-EDeviceLoadEeprom 00:30:D3:20:DA:4C
Phy found addr 31 (ticks=3337)
WaitForLink Start (ticks=3339)
No Link (ticks=4341)
<--EDeviceInitialize
GMAC DMA status register = 0x0
LIN: Data Valid
BALDWIN_DDI: cBaldwinHwIf::Init: Initializing...
BALDWIN_DDI: cBaldwinHwIf::Init: Scope successfully identified.
BALDWIN_DDI: cBaldwinHwIf::Init: Success!
Running infiniiVisionInstallHelper
Failed to start/configure network.
Device load time:
NANDFLASH: 0 ms
SNANDFLASH: 0 ms
Summary of scan:
All FATs on volume agree
Percent Fragmentation: 0
Invalid Directories: 0
Invalid Files: 0
Invalid Clusters: 0
Lost Cluster Chains: 0
ScanVolume \Agilent Flash (NANDFLASH) 0.288000
Summary of scan:
All FATs on volume agree
Percent Fragmentation: 0
Invalid Directories: 0
Invalid Files: 0
Invalid Clusters: 0
Lost Cluster Chains: 0
ScanVolume \Secure (SNANDFLASH) 0.344000
SHIM DLL, LoadRealDll [PalIO.dll] for [AgilentPalIO.dll]
SHIM [AgilentPalIO.dll] Get Process Addresses
Our command line is
Performing Startup
SHIM DLL, LoadRealDll [PalSStorage.dll] for [AgilentPalSStorage.dll]
SHIM [AgilentPalSStorage.dll] Get Process Addresses
creating \Secure\bin\Released build, Oct 11 2020, 11:14:27
Initializing FPGA...
****
FPGA Type: Wyoming
Ver: 2.011 Released
Build Time: Tue May 27 16:03:14 2014
Build Machine: TS2404M
****
No option module detected
Keyboard firmware version 32... ok
Keyboard Info: Board id 1, Board rev 3
Startup sequence is complete.
SHIM DLL, LoadRealDll [PalSysManagement.dll] for [AgilentPalSysManagement.dll]
SHIM [AgilentPalSysManagement.dll] Get Process Addresses
SHIM DLL, LoadRealDll [PalCaps.dll] for [AgilentPalCaps.dll]
SHIM [AgilentPalCaps.dll] Get Process Addresses
System has been running 23.350714 seconds
Start Up Sequence 12.064940
Memory Load 54%
System Physical Memory 38.949 / 73.230 MB
Process Virtual Memory 48.750 / 1024.000 MB
-----> InfiniiVision is running <-----
failed open \Secure\InfiniiVision\LudicrousSpeed.usb
no workaround for USB phy
=================== another normal restart in V2.60================================================================
===================================================================================================================
U-Boot 2010.03 (Oct 18 2011 - 14:28:06)Agilent P500
CPU: SPEAr600
DRAM: 128 MiB
Flash: 512 KiB
NAND: fsmc-ecc1 128 MiB
In: serial
Out: serial
Err: serial
SerNum:serial number not programmed
Chip: BD Board Rev: 4
Net: smsc
Press space to stop autoboot: 0
## Booting kernel from Legacy Image at f8050000 ...
Image Name: PBOOT
Created: 2015-05-07 8:18:27 UTC
Image Type: ARM Linux Kernel Image (gzip compressed)
Data Size: 37749 Bytes = 36.9 KiB
Load Address: 00000000
Entry Point: 00000000
Uncompressing Kernel Image ... OK
Starting kernel ...
Debug serial initialized ........OK
RTC: 2021-2-6 16:52:3.48 UTC
Microsoft Windows CE Bootloader Common Library Version 1.4 Built May 7 2015 01:38:03
Microsoft Windows CE 6.0 Ethernet Bootloader for the Agilent P500 board
Adaptation performed by Agilent Technologies (c) 2008
System ready!
Preparing for download...
RTC: 2021-2-6 16:52:3.51 UTC
Loading image 1 from memory at 0xD0600000
O
BL_IMAGE_TYPE_BIN
X
XXXXOOOOXXOOOOOOOOXOXOOOOOOOOXOOOXOOOOXXXOOOOOOOOOXOOOOXOXXOXOXXOXOXOXOXXXXOOXXXOOOOOOXXOXXOXXXXXXOOOXXXOOXXOOXXXOOOXOOXOOXXOOXOXOOOOXOXOOOOOXOOOXOOOXXXOXOXXXXXXOXXXX
OOOXOOOXOXOOOOXOOOOXOXOXOOOOOOX
OOOXOOXOOOOXXXOOOOXOOXXOOXOOOOOOOOOXOXOOOXOOOOOOXOXOOOOXOXOOOOOOOXOXOXXOOXOXOOOXOOOXOOXXOXOXOOOXOXXXXXOXOXXXOXXXOXOXXOOOXXXOXXXXXXOXXXXXXXOXXXXOXOXOXOOOXXXXOXXXXXOOOX
XOXX
OOXXOXXXOOXOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOXXOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOXXXXXOXOO
XOXOOOXOXXXXXXXXXXXXXrom_offset=0x0.
XXImageStart = 0x80361000, ImageLength = 0x1ACF7FC, LaunchAddr = 0x80362000
Completed file(s):
-------------------------------------------------------------------------------
[0]: Address=0x80361000 Length=0x1ACF7FC Name="" Target=RAM
Loading image 1 succeeded.
ROMHDR at Address 80361044h
Preparing launch...
RTC: 2021-2-6 16:52:6.86 UTC
Launching windows CE image by jumping at address 0x 362000
Windows CE Kernel for ARM (Thumb Enabled) Built on Mar 8 2013 at 17:05:33
Setting up for a Cold Reboot
Done Setting up for a Cold Reboot
Windows CE Firmware Init
BSP 1.0.0 for the SPEARHEAD600AB board (built Oct 11 2020)
Adaptation performed by ADENEO (c) 2005
+OALIntrInit
-OALIntrInit(rc = 1)
Initialize driver globals Zeros area...
pDrvGlobalArea 0xa0060000 size 0x800 (0xa0060800 -0xa0060000)
Initialize driver globals Zeros area...done
OALKitlStart
Firmware Init Done.
OALIoctlHalEnterI2cCriticalSection init i2c cs
++SER_Init: context Drivers\Active\14
SER_Init, dwIndex:2
SER2 got sysintr:0x00000017
SER2 Serial Port, new baud rate:0x1c200 (UARTCLK:48000000 IBRD:0x1a FBRD:0x2)
OHCI\system.c, GCFG_USBH1_SW_RST
OHCI\system.c, GCFG_USBH2_SW_RST
-EDeviceLoadEeprom 00:30:D3:20:DA:4C
Phy found addr 31 (ticks=3332)
WaitForLink Start (ticks=3334)
No Link (ticks=4336)
<--EDeviceInitialize
GMAC DMA status register = 0x0
LIN: Data Valid
BALDWIN_DDI: cBaldwinHwIf::Init: Initializing...
BALDWIN_DDI: cBaldwinHwIf::Init: Scope successfully identified.
BALDWIN_DDI: cBaldwinHwIf::Init: Success!
Running infiniiVisionInstallHelper
Failed to start/configure network.
Device load time:
NANDFLASH: 0 ms
SNANDFLASH: 0 ms
SHIM DLL, LoadRealDll [PalIO.dll] for [AgilentPalIO.dll]
SHIM [AgilentPalIO.dll] Get Process Addresses
Our command line is
Performing Startup
SHIM DLL, LoadRealDll [PalSStorage.dll] for [AgilentPalSStorage.dll]
SHIM [AgilentPalSStorage.dll] Get Process Addresses
Released build, Oct 11 2020, 11:14:27
Initializing FPGA...
****
FPGA Type: Wyoming
Ver: 2.011 Released
Build Time: Tue May 27 16:03:14 2014
Build Machine: TS2404M
****
No option module detected
Keyboard firmware version 32... ok
Keyboard Info: Board id 1, Board rev 3
Startup sequence is complete.
SHIM DLL, LoadRealDll [PalSysManagement.dll] for [AgilentPalSysManagement.dll]
SHIM [AgilentPalSysManagement.dll] Get Process Addresses
SHIM DLL, LoadRealDll [PalCaps.dll] for [AgilentPalCaps.dll]
SHIM [AgilentPalCaps.dll] Get Process Addresses
System has been running 20.651762 seconds
Start Up Sequence 10.129452
Memory Load 53%
System Physical Memory 38.742 / 73.230 MB
Process Virtual Memory 48.500 / 1024.000 MB
-----> InfiniiVision is running <-----
failed open \Secure\InfiniiVision\LudicrousSpeed.usb
no workaround for USB phy
--- End code ---
analogRF:
I think this recovery method using the serial console and YMODEM is pretty good and I never had problem uploading the kernel but it takes time (30-40 minutes depending on the version/size)
I am now pretty sure that even 2.35 would have worked from the beginning and the problem was that \usb\Startup\infiniivision.lnk should have been modified to force the scope to execute the infiniivisionLauncher.exe from the USB and not from the scope's NAND flash because it was corrupted
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version