Products > Test Equipment
Agilent DSOX3054A not booting possible NAND corruption HELP! (RESOLVED)
<< < (9/11) > >>
analogRF:

--- Quote from: TheSteve on February 07, 2021, 06:37:01 am ---Did you get all of the front panel buttons working?
There is a small ribbon cable for the front - check that.

--- End quote ---

yes the problem is that small flex cable  :palm:
I cannot figure out what exactly the problem is with it but as soon as I bend it in a certain shape
(pull it up near the connector) all buttons work. So I ordered a cable from Digikey (732-3555-ND) which I hope it will fit. It's 3mm longer but it shouldn't be a problem. I have to wait until Tuesday I think...
analogRF:
Now that the scope is MSO, can I get the front label (badge) changed to MSO-X? is it possible to replace that label?
has anybody done that before here?

I guess since they officially sell MSO option to DSO owners, they should probably include a new badge in the kit, no?



analogRF:

--- Quote from: blueskull on February 07, 2021, 04:08:26 pm ---
--- Quote from: analogRF on February 07, 2021, 04:03:18 pm ---I guess since they officially sell MSO option to DSO owners, they should probably include a new badge in the kit, no?

--- End quote ---

They should have. The front panel overlay is user replaceable.

My scope came in the box with a spare Chinese overlay and a preinstalled English overlay.

--- End quote ---

that does not include the ID label on the top of screen. front panel overlay is a different thing
analogRF:

--- Quote from: analogRF on February 07, 2021, 11:36:14 am ---
--- Quote from: TheSteve on February 07, 2021, 06:37:01 am ---Did you get all of the front panel buttons working?
There is a small ribbon cable for the front - check that.

--- End quote ---

yes the problem is that small flex cable  :palm:
I cannot figure out what exactly the problem is with it but as soon as I bend it in a certain shape
(pull it up near the connector) all buttons work. So I ordered a cable from Digikey (732-3555-ND) which I hope it will fit. It's 3mm longer but it shouldn't be a problem. I have to wait until Tuesday I think...

--- End quote ---

Just to be complete here, I replaced the small flex cable with the part I got from Digikey and the softkeys are all working now  :)
The scope just passed user Cal  :) :) :D

Last user Cal was June 2013, the same time the scope was manufactured  :o:o and yet there was like <1mV offset on channels which is now gone.
TheSteve:
Please post the part # of the cable you used, maybe it will help someone else out down the road.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod