Products > Test Equipment

Agilent DSOX3054A not booting possible NAND corruption HELP! (RESOLVED)

<< < (9/11) > >>

analogRF:

--- Quote from: TheSteve on February 07, 2021, 06:37:01 am ---Did you get all of the front panel buttons working?
There is a small ribbon cable for the front - check that.

--- End quote ---

yes the problem is that small flex cable  :palm:
I cannot figure out what exactly the problem is with it but as soon as I bend it in a certain shape
(pull it up near the connector) all buttons work. So I ordered a cable from Digikey (732-3555-ND) which I hope it will fit. It's 3mm longer but it shouldn't be a problem. I have to wait until Tuesday I think...

analogRF:
Now that the scope is MSO, can I get the front label (badge) changed to MSO-X? is it possible to replace that label?
has anybody done that before here?

I guess since they officially sell MSO option to DSO owners, they should probably include a new badge in the kit, no?



analogRF:

--- Quote from: blueskull on February 07, 2021, 04:08:26 pm ---
--- Quote from: analogRF on February 07, 2021, 04:03:18 pm ---I guess since they officially sell MSO option to DSO owners, they should probably include a new badge in the kit, no?

--- End quote ---

They should have. The front panel overlay is user replaceable.

My scope came in the box with a spare Chinese overlay and a preinstalled English overlay.

--- End quote ---

that does not include the ID label on the top of screen. front panel overlay is a different thing

analogRF:

--- Quote from: analogRF on February 07, 2021, 11:36:14 am ---
--- Quote from: TheSteve on February 07, 2021, 06:37:01 am ---Did you get all of the front panel buttons working?
There is a small ribbon cable for the front - check that.

--- End quote ---

yes the problem is that small flex cable  :palm:
I cannot figure out what exactly the problem is with it but as soon as I bend it in a certain shape
(pull it up near the connector) all buttons work. So I ordered a cable from Digikey (732-3555-ND) which I hope it will fit. It's 3mm longer but it shouldn't be a problem. I have to wait until Tuesday I think...

--- End quote ---

Just to be complete here, I replaced the small flex cable with the part I got from Digikey and the softkeys are all working now  :)
The scope just passed user Cal  :) :) :D

Last user Cal was June 2013, the same time the scope was manufactured  :o:o and yet there was like <1mV offset on channels which is now gone.

TheSteve:
Please post the part # of the cable you used, maybe it will help someone else out down the road.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod