EEVblog Electronics Community Forum
Products => Test Equipment => Topic started by: andrebo on February 24, 2014, 10:37:21 am
-
I have bought an e4406a.
But i noted soms strange behavior of the marker in the basic mode.
I dont know of this is normal or an misalignment.
All test on start up are succes.
Span 10 Mhz / 50Mhz unmodulated signaal on CF
If i use a marker and then search ,the freq reading is spot on 50.00000Mhz.
But if i move the CF setting to say 55Mhz
Then marker and search ,and then there is a difference in the marker reading
Marker freq is then eg 50.03457Mhz.
I do not know if this is normal or i have missed a setting.
Does someone have a clue ?
Regards.
Andre