| Products > Test Equipment |
| Agilent E7495 linux root account |
| << < (83/91) > >> |
| pieroc91:
Amazing all you guys hacked on this thing... on my device i got stuck at the Copyright screen and does not respond to anything, i've updated the firmware, replaced the elgato binary modified licences and still can't pass that screen, had anyone came across this problem and might have a clue on how to fix it? Thanks! |
| kirill_ka:
--- Quote from: pieroc91 on June 14, 2021, 11:14:18 pm ---Amazing all you guys hacked on this thing... on my device i got stuck at the Copyright screen and does not respond to anything, i've updated the firmware, replaced the elgato binary modified licences and still can't pass that screen, had anyone came across this problem and might have a clue on how to fix it? Thanks! --- End quote --- The symptom is not specific. It's probably the "elgato" fails to initialize (possibly due to some hardware problem). Try to gather more information (messages, logs, diagnostic web pages* ). Despite the UI is not started the device still can be accessed through the Ethernet and console ports. * The ones you gеt by accessing the device via http. |
| pieroc91:
Hi @kirill_ka yes, i can access via telnet without a problem, the web interface is unstable for me, sometimes work, sometimes doesn't and when it works it does not log in. if i give it a ps aux i get this --- Code: ---[root@Linux /root]$ps aux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 2.0 0.8 1384 544 ? S 14:40 0:07 init root 2 0.0 0.0 0 0 ? SW 14:40 0:00 [keventd] root 3 0.0 0.0 0 0 ? SWN 14:40 0:00 [ksoftirqd_CPU0] root 4 0.0 0.0 0 0 ? SW 14:40 0:00 [kswapd] root 5 0.0 0.0 0 0 ? SW 14:40 0:00 [bdflush] root 6 0.0 0.0 0 0 ? SW 14:40 0:00 [kupdated] root 7 0.0 0.0 0 0 ? SW 14:40 0:00 [mtdblockd] root 8 0.0 0.0 0 0 ? SW 14:40 0:00 [khubd] root 40 0.0 0.0 0 0 ? SWN 14:40 0:00 [jffs2_gcd_mtd3] root 54 0.0 1.1 1480 732 ? S 14:40 0:00 /sbin/cardmgr -f root 574 0.0 1.0 1568 648 ? S 14:40 0:00 dhcpcd -DH -t 10 root 597 0.0 0.8 1680 544 ? S 14:40 0:00 syslogd -m 0 bin 623 0.0 0.7 1456 444 ? S 14:40 0:00 [portmap] root 653 0.0 1.0 1592 644 ? S 14:40 0:00 inetd root 666 0.0 0.8 1704 544 ? S 14:40 0:00 /bin/sh /etc/rc.d/rc3.d/S51timeUpdate.sh start root 667 0.0 1.2 1788 772 ? S 14:40 0:00 /bin/bash /flash/elgato/utils/keepTimeUpdated root 668 0.0 0.5 1672 336 ? S 14:40 0:00 sleep 1200 root 697 0.0 0.7 1572 476 tty1 S 14:41 0:00 /sbin/getty 38400 tty1 root 698 0.0 0.7 1572 484 ttyS/ttySA0 S 14:41 0:00 /sbin/getty -L ttyS0 38400 vt100 root 699 0.0 1.2 1796 808 ? S 14:41 0:00 /bin/bash /root/catch_sleep.sh root 732 2.2 12.1 12060 7624 tty2 S 14:41 0:07 /flash/siege/bin/_siege -Xmx23m -DlocalAddress=127.0.0.1 -Dserver=127.0.0.1 -DLogger.level=2 -jar egclient.jar root 734 0.0 12.1 12060 7624 tty2 S 14:41 0:00 /flash/siege/bin/_siege -Xmx23m -DlocalAddress=127.0.0.1 -Dserver=127.0.0.1 -DLogger.level=2 -jar egclient.jar root 735 0.0 12.1 12060 7624 tty2 S 14:41 0:00 /flash/siege/bin/_siege -Xmx23m -DlocalAddress=127.0.0.1 -Dserver=127.0.0.1 -DLogger.level=2 -jar egclient.jar root 736 0.0 12.1 12060 7624 tty2 S 14:41 0:00 /flash/siege/bin/_siege -Xmx23m -DlocalAddress=127.0.0.1 -Dserver=127.0.0.1 -DLogger.level=2 -jar egclient.jar root 737 0.0 12.1 12060 7624 tty2 S 14:41 0:00 /flash/siege/bin/_siege -Xmx23m -DlocalAddress=127.0.0.1 -Dserver=127.0.0.1 -DLogger.level=2 -jar egclient.jar root 738 0.2 12.1 12060 7624 tty2 S 14:41 0:00 /flash/siege/bin/_siege -Xmx23m -DlocalAddress=127.0.0.1 -Dserver=127.0.0.1 -DLogger.level=2 -jar egclient.jar root 739 0.0 12.1 12060 7624 tty2 S 14:41 0:00 /flash/siege/bin/_siege -Xmx23m -DlocalAddress=127.0.0.1 -Dserver=127.0.0.1 -DLogger.level=2 -jar egclient.jar root 740 0.0 12.1 12060 7624 tty2 S 14:41 0:00 /flash/siege/bin/_siege -Xmx23m -DlocalAddress=127.0.0.1 -Dserver=127.0.0.1 -DLogger.level=2 -jar egclient.jar root 741 0.0 12.1 12060 7624 tty2 S 14:41 0:00 /flash/siege/bin/_siege -Xmx23m -DlocalAddress=127.0.0.1 -Dserver=127.0.0.1 -DLogger.level=2 -jar egclient.jar root 742 0.0 12.1 12060 7624 tty2 S 14:41 0:00 /flash/siege/bin/_siege -Xmx23m -DlocalAddress=127.0.0.1 -Dserver=127.0.0.1 -DLogger.level=2 -jar egclient.jar root 743 0.0 4.2 18604 2660 ? S 14:42 0:00 /flash/egServer/elgato -xaemon -o /dev/ttyS0 -e /dev/ttyS0 root 744 0.4 1.3 1956 848 ? S 14:46 0:00 in.telnetd root 745 0.5 1.4 1816 928 pts/0 S 14:46 0:00 -bash root 757 0.0 1.3 2712 852 pts/0 R 14:46 0:00 ps aux --- End code --- if a dmesg i cant get a clear error from the elgato server --- Code: ---jffs2_scan_inode_node(): Data CRC failed on node at 0x032efdfc: Read 0xe6bf2df9, calculated 0xb90b73e0 jffs2_scan_eraseblock(): Node at 0x032f0884 {0x1985, 0xe001, 0x00000b28) has invalid CRC 0xe5525c47 (calculated 0x63c62ee9) jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x032f0888: 0x0b28 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x032f088c: 0x5c47 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x032f0890: 0x02a9 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x032f0894: 0x01c8 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x032f0898: 0x8124 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x032f08a0: 0x8000 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x032f08a4: 0x22ff instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x032f08a8: 0x22ff instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x032f08ac: 0x22ff instead Further such events for this erase block will not be printed AVR driver initialized. version 1.1, date:Aug 6 2004 elgato: unhandled page fault at pc=0x40136f9c, lr=0x02540590 (bad address=0x6765723b, code -1) pc : [<40136f9c>] lr : [<02540590>] Not tainted sp : beffe654 ip : 000003a0 fp : beffe6a4 r10: 401e61a0 r9 : 00000170 r8 : 401e5498 r7 : 0000004d r6 : 72747369 r5 : 6765722f r4 : 00000510 r3 : 000003a1 r2 : 02540700 r1 : 401e56f8 r0 : 401e5700 Flags: nzCv IRQs on FIQs on Mode USER_32 Segment user Control: C08A717F Table: C08A717F DAC: 00000015 --- End code --- i'm running it almost barebones, without the A3 board on it. still with the A3 board on it the ps aux is --- Code: ---[root@Linux /root]$ps aux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 8.4 0.8 1384 544 ? S 14:40 0:07 init root 2 0.0 0.0 0 0 ? SW 14:40 0:00 [keventd] root 3 0.0 0.0 0 0 ? SWN 14:40 0:00 [ksoftirqd_CPU0] root 4 0.0 0.0 0 0 ? SW 14:40 0:00 [kswapd] root 5 0.0 0.0 0 0 ? SW 14:40 0:00 [bdflush] root 6 0.0 0.0 0 0 ? SW 14:40 0:00 [kupdated] root 7 0.0 0.0 0 0 ? SW 14:40 0:00 [mtdblockd] root 8 0.0 0.0 0 0 ? SW 14:40 0:00 [khubd] root 40 0.0 0.0 0 0 ? SWN 14:40 0:00 [jffs2_gcd_mtd3] root 54 0.0 1.1 1480 732 ? S 14:40 0:00 /sbin/cardmgr -f root 574 0.0 1.0 1568 644 ? S 14:40 0:00 dhcpcd -DH -t 10 root 597 0.0 0.8 1680 544 ? S 14:40 0:00 syslogd -m 0 bin 623 0.0 0.7 1456 444 ? S 14:40 0:00 [portmap] root 653 0.0 1.0 1592 644 ? S 14:40 0:00 inetd root 666 0.0 0.8 1704 544 ? S 14:40 0:00 /bin/sh /etc/rc.d/rc3.d/S51timeUpdate.sh start root 667 0.0 1.2 1788 772 ? S 14:40 0:00 /bin/bash /flash/elgato/utils/keepTimeUpdated root 668 0.0 0.5 1672 336 ? S 14:40 0:00 sleep 1200 root 688 2.8 4.2 15520 2636 ? S 14:40 0:01 /flash/egServer/elgato -xaemon -o /dev/ttyS0 -e /dev/ttyS0 root 697 0.0 0.7 1572 476 tty1 S 14:41 0:00 /sbin/getty 38400 tty1 root 698 0.0 0.7 1572 484 ttyS/ttySA0 S 14:41 0:00 /sbin/getty -L ttyS0 38400 vt100 root 699 0.0 1.2 1796 808 ? S 14:41 0:00 /bin/bash /root/catch_sleep.sh root 711 0.0 4.2 15520 2636 ? S 14:41 0:00 /flash/egServer/elgato -xaemon -o /dev/ttyS0 -e /dev/ttyS0 root 712 0.0 4.2 15520 2636 ? S 14:41 0:00 /flash/egServer/elgato -xaemon -o /dev/ttyS0 -e /dev/ttyS0 root 713 0.0 4.2 15520 2636 ? S 14:41 0:00 /flash/egServer/elgato -xaemon -o /dev/ttyS0 -e /dev/ttyS0 root 714 0.0 4.2 15520 2636 ? S 14:41 0:00 /flash/egServer/elgato -xaemon -o /dev/ttyS0 -e /dev/ttyS0 root 717 0.0 4.2 15520 2636 ? S 14:41 0:00 /flash/egServer/elgato -xaemon -o /dev/ttyS0 -e /dev/ttyS0 root 732 17.5 11.6 11032 7328 tty2 S 14:41 0:07 /flash/siege/bin/_siege -Xmx23m -DlocalAddress=127.0.0.1 -Dserver=127.0.0.1 -DLogger.level=2 -jar egclient.jar root 734 0.0 11.6 11032 7328 tty2 S 14:41 0:00 /flash/siege/bin/_siege -Xmx23m -DlocalAddress=127.0.0.1 -Dserver=127.0.0.1 -DLogger.level=2 -jar egclient.jar root 735 0.0 11.6 11032 7328 tty2 S 14:41 0:00 /flash/siege/bin/_siege -Xmx23m -DlocalAddress=127.0.0.1 -Dserver=127.0.0.1 -DLogger.level=2 -jar egclient.jar root 736 0.0 11.6 11032 7328 tty2 S 14:41 0:00 /flash/siege/bin/_siege -Xmx23m -DlocalAddress=127.0.0.1 -Dserver=127.0.0.1 -DLogger.level=2 -jar egclient.jar root 737 0.1 11.6 11032 7328 tty2 S 14:41 0:00 /flash/siege/bin/_siege -Xmx23m -DlocalAddress=127.0.0.1 -Dserver=127.0.0.1 -DLogger.level=2 -jar egclient.jar root 738 2.6 11.6 11032 7328 tty2 S 14:41 0:01 /flash/siege/bin/_siege -Xmx23m -DlocalAddress=127.0.0.1 -Dserver=127.0.0.1 -DLogger.level=2 -jar egclient.jar root 739 0.0 11.6 11032 7328 tty2 S 14:41 0:00 /flash/siege/bin/_siege -Xmx23m -DlocalAddress=127.0.0.1 -Dserver=127.0.0.1 -DLogger.level=2 -jar egclient.jar root 740 0.0 11.6 11032 7328 tty2 S 14:41 0:00 /flash/siege/bin/_siege -Xmx23m -DlocalAddress=127.0.0.1 -Dserver=127.0.0.1 -DLogger.level=2 -jar egclient.jar root 741 0.0 11.6 11032 7332 tty2 S 14:41 0:00 /flash/siege/bin/_siege -Xmx23m -DlocalAddress=127.0.0.1 -Dserver=127.0.0.1 -DLogger.level=2 -jar egclient.jar root 742 0.0 11.6 11032 7332 tty2 S 14:41 0:00 /flash/siege/bin/_siege -Xmx23m -DlocalAddress=127.0.0.1 -Dserver=127.0.0.1 -DLogger.level=2 -jar egclient.jar root 743 1.1 1.3 1956 856 ? S 14:41 0:00 in.telnetd root 744 0.8 1.4 1816 928 pts/0 S 14:41 0:00 -bash root 757 0.0 1.3 2716 856 pts/0 R 14:42 0:00 ps aux --- End code --- and the dmesg is --- Code: ---[root@Linux /root]$dmesg Linux version 2.4.19-rmk7-ads5 (sreynard@elgato2.soco.agilent.com) (gcc version 2.95.2 19991024 (release)) #30 Wed Apr 28 13:36:58 UTC 2004 CPU: StrongARM-1110 revision 9 Machine: ADS GraphicsMaster Warning: bad configuration page, trying to continue On node 0 totalpages: 8192 zone(0): 256 pages. zone(1): 7936 pages. zone(2): 0 pages. On node 1 totalpages: 8192 zone(0): 256 pages. zone(1): 7936 pages. zone(2): 0 pages. Kernel command line: console=tty1 mem=32m@0xC0000000 mem=32m@0xC8000000 rw ramdisk_size=8192 initrd=0xC0800000,3m root=/dev/ram sa1100_pcmcia_opts=sock:0(speed_io:100,fast_mode),sock:1(speed_io:80) Relocating machine vectors to 0xffff0000 Console: colour dummy device 80x30 Calibrating delay loop... 137.21 BogoMIPS Memory: 32MB 32MB = 64MB total Memory: 59552KB available (1716K code, 360K data, 88K init) Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) Inode cache hash table entries: 4096 (order: 3, 32768 bytes) Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket sa1111_pcibuf: initializing SA-1111 DMA workaround SA1111 Microprocessor Companion Chip: silicon revision 1, metal revision 1 Starting kswapd JFFS version 1.0, (C) 1999, 2000 Axis Communications AB JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. ttyS0 at I/O 0xf0100000 (irq = 50) is a 16550A ttyS1 at I/O 0xf0120000 (irq = 51) is a 16550A ttyS2 at I/O 0xf0140000 (irq = 52) is a 16550A ttyS3 at I/O 0xf0160000 (irq = 54) is a 16550A ttySA0 at MEM 0x80050000 (irq = 17) is a SA1100 ttySA1 at MEM 0x80010000 (irq = 15) is a SA1100 ttySA2 at MEM 0x80030000 (irq = 16) is a SA1100 Console: switching to colour frame buffer device 80x30 initialize_kbd: Keyboard reset failed, no ACK Keyboard timed out[1] keyboard: Timeout - AT keyboard not present? Keyboard timed out[1] keyboard: Timeout - AT keyboard not present? pty: 256 Unix98 ptys configured UCB1200 generic module installed ucb1200 touch screen driver initialized ucb1200 adc driver initialized UCB1200 audio driver version 2.2 initialized UCB1200 audio driver Click-Avoid patch: TT <tthaele@papenmeier.de> UCB1200 Mixer driver version 0.1 initialized. TT <tthaele@papenmeier.de> smartio driver initialized. version 1.10, date:28-Jun-2002 SmartIO ID : 0x5002 Device Version : 6(0x36) Device Type : 0x8535 SA1100 Real Time Clock driver v1.00 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx smc9194.c:v0.14 12/15/00 by Erik Stahlman (erik@vt.edu) eth0: SMC91C96(r:9) at 0xf00e0000 IRQ:58 INTF:TP MEM:6144b ADDR: 00:60:0c:00:f5:28 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) PPP generic driver version 2.4.2 Sound: SA1111 UDA1341: dsp id 3 mixer id 0 SA1111 audio out: SA-1111 SAC DMA channel 6 in use DMA request for SAC output failed physmap flash device: 4000000 at 8000000 Physically mapped flash: Found 2 x16 devices at 0x2000000 in 32-bit mode 0: offset=0x0,size=0x40000,blocks=128 1: offset=0x2000000,size=0x40000,blocks=128 Using buffer write method SA1100 flash: probing 32-bit flash bus SA1100 flash: Found 2 x16 devices at 0x2000000 in 32-bit mode 0: offset=0x0,size=0x40000,blocks=128 1: offset=0x2000000,size=0x40000,blocks=128 Using buffer write method Using static partition definition Creating 3 MTD partitions on "SA1100 flash": 0x00000000-0x00100000 : "zImage" 0x00100000-0x00400000 : "ramdisk.gz" 0x00400000-0x04000000 : "User FS" Linux Kernel Card Services 3.1.22 options: [pm] SA-1100 PCMCIA (CS release 3.1.22) usb.c: registered new driver usbdevfs usb.c: registered new driver hub hcd/ohci-sa1111.c: starting SA-1111 OHCI USB Controller hcd/ohci-sa1111.c: ohci-hcd (SA-1111) at 0xf4000400, irq 109 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 1 port detected usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz> hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com RAMDISK: Compressed image found at block 0 Freeing initrd memory: 3072K EXT2-fs warning: checktime reached, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). Freeing init memory: 88K hub.c: USB new device connect on bus1/1, assigned device number 2 hub.c: USB hub found hub.c: 4 ports detected jffs2_scan_inode_node(): Data CRC failed on node at 0x032efdfc: Read 0xe6bf2df9, calculated 0x7e418cdb jffs2_scan_eraseblock(): Node at 0x032f0884 {0x1985, 0xe001, 0x00000b28) has invalid CRC 0xe5525c47 (calculated 0x63c62ee9) jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x032f0888: 0x0b28 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x032f088c: 0x5c47 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x032f0890: 0x02a9 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x032f0894: 0x01c8 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x032f0898: 0x8124 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x032f08a0: 0x8000 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x032f08a4: 0x22ff instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x032f08a8: 0x22ff instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x032f08ac: 0x22ff instead Further such events for this erase block will not be printed AVR driver initialized. version 1.1, date:Aug 6 2004 [root@Linux /root]$ --- End code --- but the fault is still the same. device stuck at copyright screen, no web interface and no remote access app response. Thanks |
| pieroc91:
Oh also this is the user manual for the computer running the device, there are descripted all the jumpers and yes, it does have two Ps/2 ports for keyboard and mouse https://support.eurotech-inc.com/developers/documents/110110-9001B_GM_Manual.pdf In case my box is completely dead i'm using it to run Doom. |
| pieroc91:
well on a closer look running elgato via telnet i found that i have license problems of which my elgato.lic is completely missing, replacing with a generic one from this post does not help since my hostID is other. is there a way to recover the hostID? --- Code: ---ElgatoManager::ElgatoManager instanceName elgatoMgr Welcome to the DMC Shell. Type 'quit' or 'bye' to exit. > DragonflyIO::waitForCTS() 5000 ms timeout: readyLevel=Open, ms elapsed since last write: 10711, read: 10711 DflyIO::write(buf=0xbffff8b0, length=4) waitForCTS() failed with error=0x810000 ElgatoManager::waitForLicenseReady() !!!!! Dragonfly expected but not found on port 4 after 90 seconds ElgatoManager::initialize() !!!! waitForLicenseReady() timeout #1, trying again ... ElgatoManager::waitForLicenseReady() !!!!! Dragonfly expected but not found on port 4 after 90 seconds ElgatoManager::initialize() !!!! waitForLicenseReady() timeout #2, trying again ... --- End code --- |
| Navigation |
| Message Index |
| Next page |
| Previous page |