Products > Test Equipment
Agilent E7495 linux root account
<< < (89/91) > >>
mil4898:
Hello Guys,

I know that I am late to the party , but I just acquired a E7495 that does not boot , and would like to get it going if at all possible.
The symptoms are , black screen which flickers a couple of times after the power button is pressed , and that is all .
I have tried to download the service manual and last firmware from page 4 , but the web server is not responding.
Could someone please re-share those files, I would be very grateful.
Best regards
Mil
ve7xen:
My mirror also posted on page 4 is still up. Does it have what you're looking for?

https://www.gotroot.ca/e7495/
mil4898:
@ve7xen Much thanks ,

Very grateful for the files .

I have made up a serial cable and can see the boot messages .
I am getting past the memory tests ok , then there is a jump to an address , and after that I have “prefetch abort” message that seems to be looping .
I am thinking about doing a flash recovery using the downloaded firmware file , and just need to get a pcmcia adapter for the compact flash card .
Best Regards
Mil
GRFixedGear:
Sorry for the other people I spammed with PM's looking for these files. I need to read all the way to the end I guess.  :-[

I really appreciate the change log as well. What is really really curious is that as best I can tell, my unit has a BETA firmware version on it, that correlates to none of these released versions. The good news is my unit came with PCMCIA card with the firmware on it, so if I only had a reader for that stupid card then I could archive that potentially diff it with the latest and gain some insights.

I will followup with the details of what I have later, but I know it is quite different than the latest because the prescribed patch for the GPS problem does not match my binary file on the unit. Not just by address... a search for the first 2 bytes specified in that patch show one promising match, but the remaining bytes do not match at all.

Thanks to all those who have contributed to this over the years. Its a fantastic resource!
GRFixedGear:
Here is the data returned from the web page (newly liberated after deleting the related web interface password file):
Product Name:   Agilent Technologies Embedded Ethernet Controller
Serial Number:   0000A00000
Firmware Revision:   B.04.20 Arms Beta 1 Build 1
Hardware Name:   elgato
Build Info 1:   060217
Build Info 2:   @(#)Linked: Feb 17 2006 13:23:20
Build Info 3:   @(#)By: stevbell
Ethernet MAC Address:   000102030405

And what is in the version.txt file:
A.04.00 Dev 14

As you can see by the nomenclature and dates, this doesnt appear to be running on released sw at this point. Looking forward to what this thing does after the upgrade to 6.25
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod