Products > Test Equipment
Agilent E8357A
<< < (4/28) > >>
joeqsmith:
I assume Steve had already put in a request to have them moved.  After your posts, I have also requested it.

When using their Option Enable, Repair tool and changing the model number (only) and then exiting, it complains about the EEPROM's HOST ID not matching.  This tool is called Option.exe.     There is another program for the EEPROM which allows you to back it up (eepromtool.exe).   I loaded both of these programs and changed the model again, saving the EEPROM before and after.  It appears that the file it creates is ASCII.  There was no difference.  The EEPROM that tool saves may not even be the same device used to store the HOSTID.   
tv84:
Joe, please upload here those tools.
joeqsmith:

--- Quote from: tv84 on November 06, 2022, 04:47:30 pm ---Joe, please upload here those tools.

--- End quote ---

I can certainly do this but I want to make sure that I send you what you need.  These will have a lot of dependencies and I suspect these will have to be installed.   If you were able to install them, these both require that the main PNA software is running for them to run.   I had attempted to setup a Win2k virtual PC with the same settings at the PNA, however I wasn't able to get very far as it wants the hardware.   I can provide you with the firmware I am using and you would have everything but I am not sure you could install it. 

I was going to just send you a link to the firmware but I suspect Keysight has scrubbed it.  Using the links I had archived now just take you to their current product line.    Again, I have it archived local so just let me know.  Archived image is just under 50MB.   The two EXEs would fit here if that's all you want.
joeqsmith:
You should now have the entire install image.
joeqsmith:
I have included the three EXEs.  The main PNA software would have to run in order to run the other two.   Let me know if there is anything else. 
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod