| Products > Test Equipment |
| Agilent/Keysight MSOX3024T LAN/VGA Module Fault - Causes? |
| << < (3/3) |
| The_PCB_Guy:
Oh wow, I completely forgot about this thread! I got the board working to about 98%. I ended up with some faint pink vertical lines spaced out across the screen. I suspect either a timing issue, SI issue, or a combination of the two. After all, this was only a 6-layer board, meaning the inner two signal layers are not separated from one another. I would not be surprised if there was crosstalk between the signals. At some point I'll add two more internal ground planes and see if the problem goes away. Overall though, the DVI-D board works well. I can't call it "HDMI" because I'm not paying for the licensing. |
| Navigation |
| Message Index |
| Previous page |