| Products > Test Equipment |
| All about Keithley DMM7510. Bugs and features, recipes, advice, notes. |
| << < (7/26) > >> |
| MegaVolt:
--- Quote from: Zucca on April 29, 2020, 09:33:22 am ---A big Thank to MegaVolt also from my side. Well done, I have a 7510 and it is my top DMM on my bench. Unfortunately I do not use it too much. :horse: I hope to share my adventures here in the future. --- End quote --- Join !!! Maybe when there will be a lot of us Keythley will pay attention to us :)) |
| MegaVolt:
--- Quote from: E-Design on April 29, 2020, 11:24:59 am ---To me, these kind of effects look like they have their explanation in firmware - So I cant help investigate it directly. What I can do is see if I can get a FW engineer to look at it or an Applications engineer who can spend the time to take a look. --- End quote --- Ask them to look. Thank!!! --- Quote ---My advice is post these questions and results on the Tek forum and if it doesnt get attention, it is easier to get more people involved to help. --- End quote --- Good! I will add them. I just don’t understand what is the problem and what is not. From the point of view of Keithley. |
| Sparky:
--- Quote from: MegaVolt on April 29, 2020, 11:43:45 am --- --- Quote from: E-Design on April 29, 2020, 11:24:59 am ---To me, these kind of effects look like they have their explanation in firmware - So I cant help investigate it directly. What I can do is see if I can get a FW engineer to look at it or an Applications engineer who can spend the time to take a look. --- End quote --- Ask them to look. Thank!!! --- Quote ---My advice is post these questions and results on the Tek forum and if it doesnt get attention, it is easier to get more people involved to help. --- End quote --- Good! I will add them. I just don’t understand what is the problem and what is not. From the point of view of Keithley. --- End quote --- MegaVolt: can you post a link to your thread on the Tek forum? I want to track it and post there also. It appears Keithley are ignoring these issues. >:( Why can't they have one firmware guy reading these forums? :( |
| MegaVolt:
--- Quote from: Sparky on April 29, 2020, 07:25:01 pm ---MegaVolt: can you post a link to your thread on the Tek forum? I want to track it and post there also. --- End quote --- https://forum.tek.com/viewtopic.php?f=363&t=142217 https://forum.tek.com/viewtopic.php?f=363&t=142031 --- Quote ---It appears Keithley are ignoring these issues. >:( Why can't they have one firmware guy reading these forums? :( --- End quote --- Bred O. was such a man. But for some reason he stopped writing on the forum. |
| MegaVolt:
DigiV 100V behaves very strange. Maybe of course these are problems of my device. If someone can check please what your devices show? At 1000V all this is present but not so bright. And at least fit into the tolerances :)) |
| Navigation |
| Message Index |
| Next page |
| Previous page |