Products > Test Equipment
All about Keithley DMM7510. Bugs and features, recipes, advice, notes.
<< < (18/26) > >>
MegaVolt:
I cannot download either the new or the old update. Did anyone manage to download the new update? Can he put it somewhere?
coromonadalix:
Their website works awfully,  they messed up my registration, lots of lags ?? in my case.  To force people to register   pfffffff

heres your file   v 1.73

https://gofile.io/d/KhSSup

around 7.2 megs

Release note pdf  added
coromonadalix:
Version 1.7.3 provides fixes and enhancements.
CRITICAL FIXES

Reference number: NS-1908
Symptom: Changing an annunciator setting (such as auto zero or filter enable) on the
Settings or Calculations screen is not reflected in the Home screen
annunciators.
Resolution: This issue has been corrected.

Reference number: NS-1909
Symptom: Temperature readings are shown as k (for kilo) degrees Celsius,
Fahrenheit, or Kelvin instead of degrees Celsius, Fahrenheit or Kelvin.
Resolution: This issue has been corrected.

Reference number: NS-1927
Symptom: The LXI identification web page shows the incorrect LXI version and web
page links.
Resolution: This issue has been corrected.


ENHANCEMENTS

Category Remote commands

Reference number: NS-1931: Added a TLS (transport layer security) option when using the
tspnet.connect() command.
connectionID = tspnet.connect(ipAddress, portNumber,
 initString, useTLS)
ipAddress: A string that indicates the IP address or host name to
connect to.
portNumber: Default 5025.
initString: Sends a string to ipAddress.
useTLS: 0 or 1;
0: Do not use TLS with the connection (default)
1: Use TLS with the connection.
When useTLS is set to 1, the instrument negotiates the security protocol
when connecting to the host or IP address that is used. This security
protocol is used when using tspnet.write() to send data or
tspnet.read() to receive data.

Version 1.7.3 Release DMM7510 7½ Digit Graphical Multimeter Version 1.7.3 Firmware Release Notes
DMM7510-FRP-V1.7.3 June 2020 Page 5 of 49
The following is an example of how to use a host name with the TLS
option:
connectionID = tspnet.connect(“hostname.domain.com”,
 443, “”, 1)

Category Remote commands

Reference number: NS-1960: The localnode.gettimewithfractional() TSP
command is available to retrieve the number of seconds elapsed since
January 1,
dmitry.bond:
Found that DMM7510 may have different probe port types. Either nice shrouded or unshrouded with thicker conductors (my guess).   
Is it an option or Tek changed the design? What is the latest?
MegaVolt:
Photo of my device. It's 2018.
Where did the second photo come from?
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod