Products > Test Equipment

All Things Yokogawa T&M

<< < (3/4) > >>

Yokogawa TM UK:
Please visit: https://y-link.yokogawa.com/YL000/

Register a free account and then click the following link:

https://y-link.yokogawa.com/YL022/

I believe this is what you may be after :)

Lee

Yokogawa TM UK:
Please let me know if there are any further questions   :D :D :D

abraxa:

--- Quote ---The manual wont list the missing samples as the DLM2000 series wont real time data transfer like the scopecorder series does. However, depending on the measurement time, you could perform a single acquisition and then post process the data.
--- End quote ---

Thanks for the information, I guess I was too hopeful there. I hope such a feature could be considered in the future then: having the scope be a DAQ device for the attached PC. Essentially, I want to trigger the scope on certain conditions and when they are met, the PC should be able to copy the data over before the next trigger event happens. 12500 data points aren't enough when the data to be examined is a medium-speed serial bus (30+ MHz), so unfortunately that limitation is a deal breaker for me.
I can make do by other means, though, so I'm able to continue my work. I was just wanting to use the DLM for it :)

Yokogawa TM UK:
Hi Abraxa, please consider the DL850 Scopecorder with its real time data transfer capabilities. This will tick all of the points that you have made so far :)
Here is a link: http://tmi.yokogawa.com/gb/products/data-acquisition-equipment/scopecorders/dl850edl850ev-scopecorder/

Joe from Tassie:
Hello!
First time post! :o

I have this excellent Yokohama OR300E handy oscillographic recorder, originally from Alstom Power later bought out by GE.

 I bought it on EBay and got it shipped from the US. It appears basically unused and comes with all the accessories too. Very pleased and it will suit my needs perfectly.

It comes with an ATA Flash card (64mb) installed, actually it’s a CF card in an adaptor. The unit says theATA Flash card is not installed, the manual says 40mb maximum but I have a datasheet that says a much larger size is compatible. It also needs to be formatted to MS Dos, I currently don’t have a way to confirm this.

I’m hoping that I might be able to find the ACRAWin32 software somewhere and use the RS232 interface instead and run it via my Toughbook, which would be a far better option in every way. I use this kind of setup for a couple of other of my instruments and it really is the way to go.
 
My line of work involves data collection for troubleshooting and calibration of industrial equipment and verifying processes. And also electronic hobbies at home and for friends.

Does anyone know where I might be able to find the software ? Or perhaps a later version is compatible that might work?

Any help is hugely appreciated  ^-^

Cheers! Joe

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod