| Products > Test Equipment |
| AN8008 US $19, 9999count, 1uV, 0.01uA, 0.01Ohm, 1pF resolution meter |
| << < (143/172) > >> |
| ciccio:
--- Quote from: metrologist on November 10, 2017, 06:51:01 pm ---I did not know you could disable it. Thanks! --- End quote --- Mine beeps 5 times (and this is annoyng) but does not power off... but mine has a different silkscreen and mybe different firmware (see my previous post). |
| stj:
just differnt settings in the eeprom. |
| Mr. Scram:
Does anyone know whether this thing uses fast or slow blow fuses? |
| stj:
i know they are not fast enough! :palm: you need to adapt it to 20mm FF rated fuses. |
| Crumble:
I opened a fuse previously, and there are just copper wires in it and no sand whatsoever. I guess these are unlikely to have been checked for breaking speed. You might be able to use these, they claim to be quick blow, but I wouldn't hold my breath: https://www.ebay.com/itm/290754775264 https://www.ebay.com/itm/300757393643 |
| Navigation |
| Message Index |
| Next page |
| Previous page |