Products > Test Equipment
AN8008 US $19, 9999count, 1uV, 0.01uA, 0.01Ohm, 1pF resolution meter
Calambres:
Anyone know of a source for the 200mA 250V ceramic 10mm fast fuses for this meter?
I've ordered 10A spare fuses from ebay. Only found them with axial leads, to be cut off when needed:
https://www.ebay.com/itm/300757393643?ViewItem=&item=300757393643&ppid=PPX000608&cnac=ES&rsta=en_ES(en_ES)&cust=4R9279867B836642B&unptid=1c4da7f6-1c88-11e8-a9c9-441ea1479d80&t=&cal=7baed6587cd5&calc=7baed6587cd5&calf=7baed6587cd5&unp_tpcid=email-receipt-auction-payment&page=main:email&pgrp=main:email&e=op&mchn=em&s=ci&mail=sys
...but I cannot find the 200mA fuses anywhere except in Aliexpress:
https://es.aliexpress.com/store/product/10A-600uA-fuse-for-RM101-102-multimeter/909123_32811804077.html
but unfortunately they only sell them to you if you've bought the meter from them. Otherwise they won't sell the fuses. I bought the meter elsewhere...
amspire:
You can get the fuses from the Richmeters store (exactly the same meters as Aneng), but ONLY if you have bought a multimeter from them:
https://www.aliexpress.com/store/product/10A-600uA-fuse-for-RM101-102-multimeter/909123_32811804077.html
Calambres:
Yeah, the same story... I bought the meter from banggood and they have no fuses for it >:(
plazma:
Wasn't there some option for a through hole fuse which was perfect if you cut the wires?
Calambres:
If you read carefully three posts above yours, that's exactly what I've ordered for the 10A fuses. The problem is that I cannot find them in a 200mA value...
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version