Products > Test Equipment
AN8008 US $19, 9999count, 1uV, 0.01uA, 0.01Ohm, 1pF resolution meter
<< < (150/172) > >>
Fungus:

--- Quote from: plazma on March 01, 2018, 11:19:59 am ---Wasn't there some option for a through hole fuse which was perfect if you cut the wires?

--- End quote ---

Yep.


--- Quote from: Calambres on March 01, 2018, 11:28:09 am ---If you read carefully three posts above yours, that's exactly what I've ordered for the 10A fuses. The problem is that I cannot find them in a 200mA value...

--- End quote ---

So get 250mA or whatever's the closest.

A 200mA fuse doesn't blow at exactly 201mA.
Calambres:
Can't find 250mA either!


I find them in Slow Blow version but not Fast Blow as required.
floobydust:
I just noticed this meter has a bug  |O
AC mA reads zero until over 3.5mA and then reads 20% low, until over 10mA where it starts to read accurately. This is with 60Hz AC sine.
exe:

--- Quote from: Calambres on March 01, 2018, 04:00:46 pm ---Can't find 250mA either!

--- End quote ---

May be there is enough space for a regular fuse?

I think I saw these fuses on AliExpress, although the price was quite high.
David Hess:
Here is a brute force method that I randomly came across in the LT1011 datasheet.  The LT1011 is an improved 311 but a couple of FET buffers and a better comparator could be used for even greater performance.

Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod